American Dj 50' Extension Cable For Light Copilot
This American DJ 50' Extension Cable for Light Copilot is designed for use with the American DJ Light Copilot (not included), an eight-channel controller with two separate chase zones and built-in microphone--you can daisy chain up to three power packs per a controller for easy installation and enhanced flexibility. For American DJ Light Copilot Controller 50' Cable Parameters Length50' (15.2..
$89.85 $131.18
American Dj 25' Extension Cable For Light Copilot
This American DJ 25' Extension Cable for Light Copilot is designed for use with the American DJ Light Copilot (not included), an eight-channel controller with two separate chase zones and built-in microphone--you can daisy chain up to three power packs per a controller for easy installation and enhanced flexibility. For American DJ Light Copilot Controller 25' Cable Parameters Length25' (7.62..
$70.95 $106.42
Chauvet Dj Freedom Par 9 Sleeve (white, 4-pack)
Change your Freedom Par H9 IP fixtures from black to white with the Chauvet DJ Freedom Flex 9 Sleeve, a four-pack of water-resistant cast aluminum sleeves that slide on and off with no additional tools. The sleeves do not need to be removed for storage or transportation. These sleeves are also compatible with Freedom Par Q9 fixtures. Works with Freedom Par H9 IP Works with Freedom Par Q9 Change Fixture Housing to White Slides On/Off with No Tools Sleeves Can Remain While Charging ..
$359.97 $471.56
Eliminator Lighting Mirror Ball (12")
Recreate the disco days of the late 1970s with the 12" Mirror Ball from Eliminator Lighting. Perfect for parties, this mirror disco ball incorporates a ring that connects to an external motor to rotate in continuous slow motion. Shine a light directly onto the ball to see a myriad of light spots spinning around on your dance floor. Rotating Mirror Ball Dramatic Dance Floor Light Effects Ring for Connecting to External Motor Hundreds of Reflective Mini Panels Hanging Ring Included ..
$179.97 $260.96
Eliminator Lighting Mirror Ball (8")
Recreate the disco days of the late 1970s with the 8" Mirror Ball from Eliminator Lighting. Perfect for parties, this mirror disco ball incorporates a ring that connects to an external motor to rotate in continuous slow motion. Shine a light directly onto the ball to see a myriad of light spots spinning around on your dance floor. Rotating Mirror Ball Dramatic Dance Floor Light Effects Ring for Connecting to External Motor Hundreds of Reflective Mini Panels Hanging Ring Included ..
$83.97 $130.99
Eliminator Lighting Mbmhd3 Slow Rotating Mirror Ball Motor
Rotate your mirror ball with the Eliminator Lighting MBMHD3, a slow-rotating, heavy-duty motor designed to safely support and rotate mirror balls up to 20" in diameter and weighing up to 22 lb, with a steady speed of 3 rpm (not adjustable). Easy to operate, this motor is intended for indoor use in permanent installations, nightclubs, or mobile DJ/band applications. The MBMHD3 includes a safety eyelet and a locking carabiner. For Mirror Balls up to 20" in Diameter Rotation Speed: Up to 3 rpm ..
$149.97 $197.96
Eliminator Lighting Mirror Ball (40")
Recreate the disco days of the late 1970s with the 40" Mirror Ball from Eliminator Lighting. Perfect for parties, this mirror disco ball incorporates a ring that connects to an external motor to rotate in continuous slow motion, as well as an additional safety ring for added security. Shine a light directly onto the ball to see a myriad of light spots spinning around on your dance floor. Rotating Mirror Ball Dramatic Dance Floor Light Effects Ring for Connecting to External Motor Additi..
$3,509.97 $4,773.56
Eliminator Lighting Mbm1rp Heavy-duty Mirror Ball Motor
Safely rotate your mirror ball with the Eliminator Lighting MBM1RP, a heavy-duty motor designed to support and rotate mirror balls up to 16" in diameter with a steady speed of 1 rpm (not adjustable). The compact size, weight, and three mounting holes make for easy installation in nightclubs, fun centers, event centers, lounges, and bars (for indoor use only.) The MBM1RP includes a 7.5" chain and an O-shaped mounting ring. For Mirror Balls up to 16" in Diameter Slow Rotation Speed: 1 rpm In..
$65.97 $95.00
Eliminator Lighting Mbdmx-plus Heavy-duty Dmx Mirror Ball Motor
Create classic disco lighting effects with the Eliminator Lighting MBDMX-PLUS, a heavy-duty mirror ball motor with DMX. Synchronize the speed and direction of up to four motors. Additionally, the MBDMX-PLUS includes two built-in DMX-controlled AC power outlets, allowing you DMX control of pin spotlights. The motor can run in standalone, primary/secondary, and DMX modes. An IR cable for use with the optional UC IR remote is included. NOTE: UC IR remote control is available separately. For Use ..
$509.97 $678.26
Eliminator Lighting Mbmhd8 Heavy-duty Mirror Ball Motor
Rotate your mirror ball with the Eliminator Lighting MBMHD8, a heavy-duty motor designed to safely support and rotate mirror balls up to 16" in diameter and weighing up to 6.6 lb, with a steady speed of 3 rpm (not adjustable). Easy to operate, this motor is intended for indoor use in permanent installations and nightclubs or in mobile DJ/band applications. The MBMHD8 includes a 13" chain and two O-shaped mounting rings. For Mirror Balls up to 16" in Diameter Rotation Speed: 3 rpm Maximum L..
$65.97 $98.95
Eliminator Lighting Hd-mb40 Heavy-duty Mirror Ball Motor
The Eliminator Lighting HD-MB40 is a heavy-duty motor designed to safely support and rotate a wide range of mirror balls up to 40" in diameter and weighing up to 89 lb, at a steady speed of 1 to 1.5 rpm. Easy to operate, this motor is intended for indoor use in nightclubs and other permanent installations. For Mirror Balls up to 40" in Diameter Rotation Speed 1 to 1.5 rpm Maximum Load: 89 lb General ..
$509.97 $739.46
American Dj Ltrack Ca2 Narrow Clamp Adapter For Electrapix Series (1.8" Neck Height)
Designed to accommodate the ElectraPix Series products, the American DJ LTrack CA2 is a clamp adapter with a narrow truss clamp that boasts a sturdy construction and is engineered to withstand the rigors of diverse applications. The adapter simplifies installation, saving you time and effort. With its dependable performance and compatibility, the 1.8" adapter securely holds your equipment, ensuring it stays firmly in place. For ElectraPix Par 7, Bar 8, and Bar 16 1.8" Neck Height Includes ..
$86.40 $116.64
American Dj Ltrack A2 Adapter For Electrapix Series Products (1.8")
Designed to accommodate the ElectraPix Series products, the American DJ LTrack A2 is a clamp adapter specifically designed to elevate your equipment rigging experience to meet the demands of professional users. The 1.8" adapter boasts a robust construction, capable of withstanding the demands of various applications. Designed to exacting standards, this adapter seamlessly integrates with a range of ADJ's popular clamps, ensuring compatibility with Narrow Clamp, Pro Clamp, Quick Rig Clamp, JR Qui..
$48.00 $59.04
American Dj Ltrack Ca1 Narrow Clamp Adapter For Electrapix Series (2.8" Neck Height)
Designed to accommodate the ElectraPix Series products, the American DJ LTrack CA1 is a clamp adapter with a narrow truss clamp that boasts a sturdy construction and is engineered to withstand the rigors of diverse applications. The adapter simplifies installation, saving you time and effort. With its dependable performance and compatibility, the 2.8" adapter securely holds your equipment, ensuring it stays firmly in place. For ElectraPix Par 7, Bar 8, and Bar 16 2.8" Neck Height Includes ..
$96.00 $140.16
American Dj Electrapix Par 7 Ip65 Outdoor-rated Battery Powered Rgbal+uv Led Par
Light up your next indoor / outdoor event with the American DJ ElectraPix Par 7, an innovative wireless DMX lighting solution that's packed with advanced features to provide unparalleled control and creativity. The ElectraPix Par 7 is powered by seven 20W RGBAL+UV LEDs and 29 0.2W RGB background LEDs with individual pixel control for incredibly dynamic lighting possibilities. Its color-calibrated LEDs, user-selectable dim modes, and electronic strobe/dimming enhance versatility. Designed for ..
$2,999.97 $4,619.95
American Dj Ltrack A1 Adapter For Electrapix Series Products (2.8")
Designed to accommodate the ElectraPix Series products, the American DJ LTrack A1 is a clamp adapter specifically designed to elevate your equipment rigging experience to meet the demands of professional users. The 2.8" adapter boasts a robust construction, capable of withstanding the demands of various applications. Designed to exacting standards, this adapter seamlessly integrates with a range of ADJ's popular clamps, ensuring compatibility with Narrow Clamp, Pro Clamp, Quick Rig Clamp, JR Qui..
$60.00 $75.60