12V Bluetooth Receiver Rca Output

We wanted to extend our Stereo system to other parts of the house, and after some research, I settled on this BT device. I'm using the BTA30 on the zone 2 (RCA analog) output of an Onkyo TX-8555 receiver to transmit to bluetooth enabled speakers and sound bars around the house. Since the Onkyo does not have digital audio out, I used an analog to digital audio converter** to go from the RCA output on the receiver to the digital TOSLINK input on the BTA30. Setup was simple and straightforward, just remember that the BTA30 has a volume knob, so remember to turn it at least halfway - i had left it all the way down and was trouble shooting for several minutes until I noticed the knob position - turned it up and it worked! I am experiencing a wee bit of latency if I'm listening to the same music in both zones at the same time, but that's most likely because the speakers I'm transmitting to are not APTX capable. In all, it's not that big of an issue, just something to be aware of. Overall, I'm extremely satisfied with the BTA30 - and the B&H shopping and shipping experience is second to none! **If you don't have a digital output available, you will need an analog to digital audio converter that accepts RCA audio inputs and digital TOSLINK output. You could use the BH #GEATVDA to accomplish this.

Very good Bluetooth receiver.

7.3V and 12V d-tap let me power my camera (7.3V), a led ligth (12V) and a wireless microphone receiver (12V). I use it on a Redrock microPod Accessory Plate (I had to found screws because the supplied ones did not fit). No more multiple batteries that dies out at different times and much longer running time with a single battery, sweet!

I bought this to provide regulated power to 3 devices. The flexibility of having D-Tap, 12V regulated and 7.2V regulated outputs made it easy to use a V-Mount batter. The only slightly odd this is that the 12V output has a 5.5/2.5mm barrel connector and the 7.2V output has a 5.5/2.1mm connector. Both barrel-to-barrel connectors terminate in a 5.5mm/2.1mm tip. This is likely to prevent plugging into the wrong voltage but seemed a bit odd to me given the ends of both cable end up being the same. There are yellow tags indicating which voltage they are feeding. All-in-all, I'm quite happy with it.

Very pleased with the image and quality of this monitor. I am using it with a Sony a6500 for 1080p HD, but works just as well with 4K. The silicone case fits well and provides good protection. Since B&H doesn't currently provide much of a description for this product, here are a few more details: It includes a 12V 2000mA AC adapter (identical to the ikan AC-12V-2A-US, B&H# IKAC12V2AUS). Includes two battery plates: F-970 and LP-E6. Included HDMI cable has a mini connector for the camera. You might need a micro (true for my a6500). Audio quality with headphones is good. As some have noted there is a slight lag between live sound and monitor output. I get the same effect with my camera connected to a TV, so can't blame the monitor. The vertical resolution is 1200 pixels. With the default menu settings the aspect ratio is set to "full" and it stretches 16:9 output vertically to fit. Change the aspect setting in the function menu to 16:9.

Very pleased with the image and quality of this monitor. I am using it with a Sony a6500 for 1080p HD, but works just as well with 4K. The silicone case fits well and provides good protection. Since B&H doesn't currently provide much of a description for this product, here are a few more details: It includes a 12V 2000mA AC adapter (identical to the ikan AC-12V-2A-US, B&H# IKAC12V2AUS). Includes two battery plates: F-970 and LP-E6. Included HDMI cable has a mini connector for the camera. You might need a micro (true for my a6500). Audio quality with headphones is good. As some have noted there is a slight lag between live sound and monitor output. I get the same effect with my camera connected to a TV, so can't blame the monitor. The vertical resolution is 1200 pixels. With the default menu settings the aspect ratio is set to "full" and it stretches 16:9 output vertically to fit. Change the aspect setting in the function menu to 16:9. (Note: I purchased the A7S-B with black case, but assume it is exactly the same except for color.)

Great sounding receiver ....AWESOME with my Bluetooth

I bought this receiver for the Bluetooth connectivity. I am now able to play my iTunes songs from the iTunes cloud through my iPhone and the new Receiver to our inside and / or outside speakers - all from my lounge chair. I am handicapped, so this is of great help to me.

Hello, I am pleased with my Mogami Gold RCA Cables 3' long. I used them between my Denon AVR Receiver and my new Emotiva 7 channel amp. They work great and my home theater speakers sound better than before, also my Denon doesn't have to work so hard so it runs cooler. Great Cables, ted

Loving it! Hooked up my consumer receiver (RCA) to my Pro speakers (XLR) in minutes. I now have a true Pro-sounding editing suite.