2.5 Video Cable To Micro Usb

Needed this for charging from a micro-USB cable. Works great for that.

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

Buy a longer cord like the USB 3.0 A/ML to MICRO B/ML CABLE - 3'

I picked up this USB 3.0 to 2.5" sata HDD/SSD cable as I wanted something small and portable as I didn't want to carry around my Star-Tech HDD dock. I got this cable at a great price and I've been satisfied with the performance and quality. Great unit.

I have tested this SATA to USB cable using several different SATA disks including regular 2.5" spinning disks and 2.5" SSD disks. The cable comes in zip lock bag with a little instruction book. The cable is very strong feeling and has a good amount of flex. The cable is long enough that I can connect it to a USB port on the bottom of my normal size PC tower and have the other end with the drive sit on top of the tower. The SATA end of the cable has 4 tiny pin holes in it which on close inspections with a drive connected, one of them has an LED in it. The LED stays lit to indicate that it is working and then flashes for disk activity. When connected, the computer detected the cable and attached drive very quickly. Transferring data to the drive was very quick and consistent in speed throughout the process. I have confirmed that this cable only works with 2.5" drives as the product describes. I guess USB just doesn't have enough power for full size 3.5" drives, which isn't a flaw of the product but larger hard drives. Great simple cable to get data from 2.5" drives. Instant portable hard drive cable or help in recovery of files laptop/SSD hard drives. I received this product in exchange for an unbiased review.

The startech USB 3.0 to 2.5 sata III drive adapter cable works real' y well fast and very reliable strongly recommend.

I have this connected by USB 3.0 to a Asustor AS5304T 4-bay NAS. Setting it up was easy after the supplied USB cable broke as soon as I went to use it. First test was installing 1tb WD hhd's, works fine. Then I decided to see if I could figure out a way to install 2.5 ssd's. I found on Thingiverse a 3D model of a drive adapter that I could print and use. Made that and put a Crucial MX500 1tb ssd on it. This was able to be inserted into a bay and recognized. That works. BTW - These drive so far were NTFS. Here is where it I had an issue. I tried installing a 2.5 Seagate 5tb hhd formatted with a NTFS volume. This did not work. The Sabrent station changed it to show up as a GPT protective partition. I next installed A WD 4tb hhd and got the same results. After googling this problem I found that someone had contacted Sabrent about it and the suggested to do a low level format. I know that doing this would tie up a drive for ages before completion. Here is what I did: 1. In Windows I used Diskpart and performed a Clean. Then used Disk Management, initialized the disk and did a simple exFat volume. This worked on the drives I wanted to use that were over 1tb. Why? I did more reading and from what I understand is that it has to do with the disk sector sizes. This I don't need to understand for I only care about getting to a usable enclosure with larger drives. I have even read elsewhere that some people got so frustrated that they put it aside to collect dust. I hope this helps them. Overall, I am please with this product except for that junky USB cable.

The USB 3.0 to 2.5" SATA III Hard Drive adapter cable w/UASP - SATA to USB 3.0 Converter for SSD / HDD works with my Windows laptop but it seemed like I needed a USB 3.0 port to provide enough power because when plugged into a USB 2.0 it would not light up. No special software or drivers required - the hard drive showed up as another drive when I looked at My Computer. I received this product in exchange for an unbiased review.

The cable is well made, not flimsy. The USB & micro USB plugs plugged in smoothly with no struggle. Recommended.

By far the best and most reliable USB to Micro-B cable I've found. Frustration takes a back seat to quality.