3 Channel Rear View Mirror

These radios are amazing. Installed in my Jeep above my rear view mirror and I am stoked about it. It’s small enough to not be in the way but is great for communicating with fellow Jeep’s. I used the ghost antenna so that it didn’t get wiped out by limbs on the trail. I’m thinking of purchasing the 6db antenna to help increase my range. I feel you can’t go wrong with this radio! Will be purchasing another for my sons Jeep.

Full set up use the 5 pro pair as rear channel speakers. Awesome!!!

In the mid-1980s I bought a Nikon 7.5mm f5.6 circular fisheye. Being an older design (1966) its rear elements protruded into the mirror box. Fortunately my F3 had a hard physical mirror lockup. The external viewfinder for this lens attached to the camera on the original Nikon F/F2’s proprietary flash shoe. I was able to buy an AS-3 flash adapter for the F3. With the F3s mirror locked up I also had to use an hand-held light meter. With amazing depth of foield focusing was never an issue. The old zoom lens had six filters on a wheel. One was a skylight and the other five were strongly colored for B&W film. While I liked the circular results, using the lens was a hassle. I often had my shoes or forehead in the picture. On a sunny day, my images suffered from solar flares. My new Nikon 8-15mm AF-S fisheye has none of those old problems. It fits on my DSLRs without any problem. It doesn’t need an external finder or separate light meter. At the 8mm setting (and lens hood off) I get a circular image very much like the vintage fisheye. The new lens is faster and focusable. Like my 14mm f2.8 Nikkor, this zoom uses gel filters inserted in the rear of the lens. I really don’t like this arrangement. This fisheye is similar in weight and size to the 14mm lens. I am also not fond of the electronic aperture control first seen on G lenses. Without an aperture ring one cannot use this zoom on older cameras. At the longer end of the zoom range (12-15mm) the image fills the (FX) frame and lens hood stays out of the way. This image is similar to my inexpensive Bower (Samyang?) 8mm fisheye with its fixed lens hood (and DX coverage). So far I haven’t used my new lens much but I think I will like it.

Purchase to go with my Sound Bar. Will add rear channel speakers later

I Used this amp to expand my RZ50 from 7.2.2 to 7.2.4 so now I can run 4 Atmos speakers and it sounds so much better. I was missing the back atmos now I have full 360 degree sound. This amp sounds great . I have it powering my klipsch RP-600M as my surround rear speakers plug into the RCA pre output. Then you take and wire your rear height/ atmos speakers into the surround rear speakers positive and negative post . Then when you set your speaker configurations to 7.2.4 it gives you a second height channel but takes away your rear surround and that’s why you use this 2 channel amp for your rear surrounds .

I ordered the Era 300 as I had sinus ones for my rear channel and they worked just okay. I what's to find out if these 300s were better and I discovered -YES they certainly are! Far better surround experience than any other Sonia rear channel solution.

Hello All, It's actually difficult to find something for rear channel speakers that need angled downward. I came across these and was intrigued so decided to give it a shot. They are PERFECT! They are extremely well built and solid, and the fact that there are different adjustments was almost too good to be true. If you're looking for something solid with flexible angle options look no further!

This works well as a head strap but it also works if you want to use it to wrap around something that may be easily scratched. This could mean the side view mirror of a car or maybe just to wrap around your pet. Over all, this product is one to have handy.

This rear cam is small enough to not interfere with your view out your back window. The picture quality is great!!!

3 items that do the job.