3 Position Dip Switch Universal Remote

We recently upgraded our church video system to HD. New cameras, switcher, projectors, network and displays We needed a way to embed audio from our main audio console into the network which feeds 20 displays in rooms and lobby locations. This little box was the problem solver. Took it out of the box, plugged it in between the switcher output and the first splitter, and we had clean audio at all locations. I did have to call Blackmagic support regarding DIP switch settings. All the diagrams show the switches in the UP position for ON and in the DOWN position for OFF. However, the actual DIP switch is the reverse of that. However, in our case, we didn't have to make any switch settings, it worked out of the box.

After my Canon remote switch took a dip in a tide pool, I knew that a new one would be required. After talking with my work shop instructor and reading the reviews, I would buy Vello model. At about a third of the cost, why not. It works just as well, and it somewhat larger, which feels good in my hand. I'm planning on buying another before heading back to the coast, for having a spare that is affordable.

This worked pretty well right away, only complaint is that the dip switch diagram was less helpful than I would have liked.

Works really good after you figure out the dip switch map. It’s a little tough.

Easy to use. Dip switch controls explained on chassis makes sense.

The remote is so simple to use and it works great. On the back of the device is a two position switch that allows you to choose either an instant release of the shutter or a two second delay. It worked as far as 40 feet from the camera (canon xsi) indoors but the range probably would decrease in bright light or back lit conditions. The tiny remote came with a nice case as well. No more running from the camera to get into the photograph!

It allows me to either use the remote or the receiver as the switch. I really like it.

I love using the remote switch!

I ordered the up down cross converter. I adjusted the dip switch for 1080 60 & hooked everything up and BOOM! It works. I can now use my laptop in my presentations & productions! Apparently, the old days of "adjustability" with analog- are gone. With digital, it's either working or no, not working. This converter helps with the "close but no cigar" moments - after you check & re-check and it still doesn't cooperate. I recommend that all parties take a hard look at the features, advantages, & benefits of the BMD line of tools & understand the how & why they were created.

This converter is perfect for my use in extracting audio separately from a camera's SDI output. That way I'm able to send the audio to a mixer for control, as sometimes a live camera in the field has both a shotgun mic and a wireless mic on its inputs. The converter has a side panel DIP switch assembly that allows you to select the extraction function you need, and the bottom panel on this converter shows you various DIP settings -- BUT nothing was there that made it function for me (specifically using DIP Switch 8). I strongly suggest you download the PDF manual (available here on the B&H page for this product under the heading, Guides & Manuals). Go to page 53 and read all about the DIP Switch Settings. Again, you might need to turn Switch 8 off in order for the converter to do the job. Once you get the audio output you need I think you'll be impressed. It is absolutely noiseless (well, unless you have a noisy mic).