3D Print Bed Sticker Peeling

My first 3D printer and I love it. The instructions are clear and it is easy to assemble out of the box. There are a ton of youtube videos on this printer so this has helped me a lot. What I found most valuable is to make sure you FIRST mechanically flatten the bed and then do the auto-leveling. I do an auto-leveling before each print because every time I remove a previous print I fear it moves the adjustment. Remember we are printing ~0.12-0.2mm layer heights so I think it is important to auto-level each time. It only takes a minute or two. Also do it with the bed and nozzle at the temperature you are going to print at.

I like this combo it has what I need and the best thing is that it is original that makes it easier to print my labels sticker

As a first time 3D Printer owner, I found this equipment to be very user friendly and intuitive. I especially like the automatic bed leveling and 7" display features.

A really good 3d printer! The removable bed is so much easier to remove prints than my old finder! Remember you must first calibrate the extruder and then level the bed. I would do this twice! Also set the auto bed leveling on. After that it prints great!

[This review was collected as part of a promotion.] This little printer is a great device for printing joyful memories at home, right from the party or event and share with your friends. The quality and color of the images are superb. It only takes few seconds to print and the printer application is super easy and convenient to use. It even has a lot of cute sticker and fun frame options that you can design your photos with. The package came with two beautiful photo albums and printing paper and another kind of sticker paper. It’s amazing to see how the printer transfers color without using any ink cartridges. It makes it more convenient to use, all you need is to order ink infused paper from their app and you are ready to go. The printer is very smooth, fast and low sound while printing. The battery lasts about 2 hours, which I would say is enough for a little device to print about 20 images in that amount of time. I love that I can print my own photos at home, and love how comfortable and fun the whole experience is with Canon. This is my new favorite personal printer! Everyone should have one.

[This review was collected as part of a promotion.] As someone with an online store, I love the fact that Influenster and DYMO sent this to me to test. This little guy will save me so much on my printer ink and tape. Before I was printing my labels and taping them to the package but with this they print onto a sticker which helps me get the job done faster. Speaking of fast, the speed which something prints from this is almost instantaneous. The software makes creating labels quick and easy. You can print more than just shipping labels too. It will print whatever you want onto a sticker. Choose your text, photo, font and clip art with ease. It does only print in black and white because it’s a thermal printer, which does not use ink. I love how small it is, so I’m not using up all the space on my desk. The only thing that was remotely difficult was installing the label roll into the printer, which was likely user error anyway. If you participate in e-commerce or need to ship your products, this is an excellent investment.

#CanonIVY #Sponsored. I love that the camera is portable for printing or you can print from your phone to the camera. Also the portal printer is awesome for printing from other devices. My son loves that the back of the film is a sticker and I love the sticker dots. o was able to print out a nice circle for the back of my phone. The app is great and we love the customization of borders and stickers you can add to you photos. This is the full package. Only thing I think we didn't like so much was the size of the camera its self is awkward. If it were possible to be as sleek as the stand alone portable printer that would be more ideal for carrying in your pocket. But, overall we love it!

Great product easy to use print sticker right from my tablet with an additional attachment cord

Perfect item for delivering a professionally finished print. Plain enough you can add your own sticker for branding.

The da Vinci Jr. 1.0 is a great bang for your buck with the decent build size of 6 x 6 x 6 inches and SD card compatibility. I printed out numerous projects so far and the print quality on this machine is fantastic. The only issues with printing is that it sometimes has trouble printing small details. However, this could be improved by changing the print settings in the XYZware, like making the extruder move at a slower rate, which decreases streaking. So, one of the most important features about this printer is its usability. Let me tell you right now, this machine will take you a while to set up properly. There isn't the three-knob calibration print bed that other 3D printers have,for this printer wants to be more approachable by maintaining a fixed, leveled print bed. The only thing you have to do is fix the Z Offset, which is the distance from the extruder nozzle to the print bed. This is the only calibration you have to do but it can be tricky getting it right the first few times. Unfortunately, not all of these printers were made the same, one printer could be printing excellent at .90mm offset, but mine functions the best around 1.65mm offset. This printer does 100 to 400 microns, and the infill and speed are all adjustable in the XYZware. I've printed out some quick decorations for my desk, but I've also spent a few hours printing out this model of the Statue of Liberty at excellent quality (100 microns) and slow speed at a 30% infill. The quality of the model was amazing. Overall, the 3D printer was hard, even frustrating at times to set up properly, but once it gets going it produces some of the best prints I've ever seen.