7.1 Speaker Placement Ceiling

I could see the next step is an in-ceiling or in-wall mount for this size speaker.

Great sounding and very flexible placement options. Perfect speaker for Atmos.

If the sound and your music library means the most !!! The experience is phenomenal.opt for the speaker stand For the best placement.

Definitely a great choice for full range ceiling speaker replacement... best price, no shipping or other fees,no order mistakes or delays.Simple installation; least ceiling hole limited because side arm clamping not used. Definitely would shop here again.

I have a small 10'x5' bathroom but also have a small flat panel tv that is about 7' from the shower so I can't hear it. I bought a single RC6s, installed it about 1' away from the shower (these are supposed to tolerate high humidity) and connected it to an audio engine N22 amp. I hooked up the tv and also an old smartphone with Pandora and I now have an awesome bathroom setup. Great sound for a single in-ceiling speaker. Some songs come across "boomy" that have a lot of bass but that is nit-picking. Does anyone else even offer a 2 channel ceiling speaker?

I used these speakers with JBL 19cs subwoofers for a weight room facility sound system. The total system consisted of 6 - 26c speakers and 4 - 19cs subwoofers. Wiring is made easy with the removable terminal blocks and passthrough wiring. Basically each speaker connects to each other in a line. This installation method reduces cost for speaker wire and labor involved with running extra wire. The terminal blocks have 4 wire holes. For the first speaker in the line will use holes 2 & 3 for the line connecting to the amplifier. Then a wire is ran from speaker 1 to speaker 2. Holes 1 & 4 from speaker 1 connects to holes 2 & 3 on speaker 2. This continues for the entire line. Be sure to properly power these speakers. Both the 19cs and 26c need 140 watts of power. In our installation we used 2 amplifiers splitting the system into left and right sides of the room. Since each amp had 2 outputs of 500 watts for each channel. This provided some headroom for the speakers. On both amps output 1 was was the high and output 2 was the low. Output 1 had 3 26c speakers and output 2 had 2 19cs subwoofers. These amplifiers had a built in crossover feature that splits the signal into high and low frequences which is essential for installing a system like this. A xlr splitter was used to convert the output from the mixer (1 xlr) to inputs for both amps (2 xlr). A cutout template is provided for cutting ceiling tiles. Once tiles are put back in the ceiling the installation can be done without access into the ceiling. The speaker is designed to push up through the cutout in the ceiling tile and clamps down to the C bracket (included). Make sure to have someone assist with installing, these can be insalled with one person but can be difficult for one person to lift, attach wires, put into place, and screw down holders. Overall these speakers work as expected and would buy again. They install nicely and end product looks professional. Nothing less to be expected from JBL.

Because any quality speaker can be used for Dolby Atmos sound I decided to reallocate a pair of Pioneer quality bookshelf speakers to operate as Dolby Atmos speakers each sitting atop a High Quality tower speaker in order to fire upward into the vaulted ceiling. It was clear the support firing angle of the Kanto S4 desktop stand met the requirement . These are study metal stands and excel at providing the support angle required to allow a speaker to assume an Atmos ceiling firing angle. If Kanto's reads this review they should suggest this function as a use as well

Using in church venue ceiling height 12ft. Running mono system with sub, Speaker is mounted to ceiling 51ft from back wall centered on 60 ft room width. Previous speaker a Renkhas Heinz too loud below and directly in front of speaker, dead spots in back corners of room also high end muffled dropped off significantly to the side. Did a lot of research looking at polar patterns of different speakers and the Toa fit the bill what clinched it was the ability to adjust the dispersion angle of each speaker in the array. Initally was going to mount it horizontal but the dispersion wasn't good so mounted it vertically and by adjusting the speakers the dispersion is great, not too loud in front and underneath, no dead spots in corners, highs are crisp full 180 degrees around room. Also purchased the adjustable ceiling mount.

We were browsing for ceiling speaker options for a LED TV with terrible sound. Salesman asked what we needed them for and showed us the Sonos system options and within 2 minutes I was working it myself in the store from saleman's ipad. Purchased soundbar, sub, and bridge for the room we were shopping for. Got home installed in less than 10 minutes and returned to the store within one hour to purchase another soundbar, sub, and two play3's for the den which had a perfectly working yet archaic Bose Acoustimass and receiver. LOVE THIS SYSTEM and have intentions of adding on more components soon. We have told everyone we know and have demo'd it to many. So easy yet such terrific sound quality.

Easy to setup and surprisingly great sound from this in wall speaker. I’m using one pair as atmos ceiling speakers and another pair as rear surround.