9 Channel Avr With Bluetooth Transmitter

I bought this to replace a 13 year old Denon AVR that was disconnecting my TV signal at every channel change. This was an easy replacent and works very well to power my 5-channel home entertainment center. I highly recommend both this model and the Denon brand in general.

Unit does a great job keeping my Denon 9 channel AVR running cool. I keep it on auto, with the lowest fan setting, and the AVR stays considerably cooler than before!

9ae Nice.

Expensive. Setup was easy (but time consuming) Great sound (easiest comparison @ if you already know DSEE "ULTIMATE" upscaling = headphones, walkmans, XPERIA, soundbars) then AVR provides a fuller sound stage @ deeper lows along with the added benefits of "DSEE ultimate" vastly clearer/deeper/fuller ***same speakers, same AUDIO source quality = ABSOLUTELY NO SUBWOOFER IS REQUIRED *** This AVR even makes existing "DSEE ULTIMATE" soundbars/headphones sound BETTER (even though Bluetooth) ____ Sony Music center APP (is an added bonus= easier to use than remote "only after" initial setup) ____ (ONLY complaint) I want to physically see volume levels for connected Bluetooth devices, displayed on device SCREEN and/or TV (There is absolutely nothing — no numbers, bars — only +/- then "MAX" ) Also wish it still had an audio out port (1/4 or 3.5mm @ anywhere front/rear) there is still a work around. For the price it should be included.

After using the single channel version for a few years I decided to buy the two transmitter package of Saramonic series 9 wireless mics. They come in a strong metal case and have good electronics inside. The receiver can mount on your camera shoe, and the antennas assure long range indoors or outdoors. The tie-clip mics work fine for me, but you can also connect more serious microphones. The 500 MHz UHF frequency range means no interference from WiFi or Bluetooth devices that seem to be everywhere these days.

I bought this to replace two Polsen ULW-16's I was using so this is like reviewing the purchase of a Mercedes after driving a Ford Pinto. I was getting so tired of messing with the Polsen before every interview, trying to find a channel that didn't have massive feedback and if I did, I constantly worried that the user would inadvertently change the channel on the transmitter (which happened too often!). The transmitter and receiver were large, clunky and poor quality. The Sennheiser AVX is an amazing wireless lav setup. I was up and running within seconds, literally, and it just works! No more worry about searching for a workable UHF channel that works. the link protection (which scans available frequencies and will automatically switch before any interference becomes audible) works incredibly well. I have experienced zero feedback in any of my recordings. The automatic sensitivity adjustment is a great feature as well and does a great job at keep the audio at a desired level the entire time. I've heard some complain about the rechargeable batteries this set uses, but I personally love that I don't have to mess with AA batteries any longer. As long as you're not trying to capture audio for 5-7 hours continuously on one change, you'll be just fine. They work while being changed by a small USB changer as well so as long as you have a portable charger, you'll be hard pressed to run out of power. If you are a solo shooter and need an incredibly high quality plug and record wireless mic system, look no further than the Sennheiser AVX. 6 out of 5 stars!

I have two of these now. I have them hooked up to Einstein Studio lights. This way the strobes will only fire from the channel i'm set to with the transmitter on my camera rather than someone else's flash.

Very reasonable price for this sync cord, which I use with a Calumet 4-channel wireless receiver/transmitter combo on a Dynalite strobe pack.

I purchased the Xvive wireless guitar system based on a number of positive YouTube reviews. I figured for the price that it would be worth it if I could get it to work. I first tried it by inserting the transmitter into my PRS and the received into my Mesa Boogie amp directly. Worked perfectly. I didn't mess around with selecting a channel so I suppose it just worked with the default selection. I next plugged the receiver into an overdrive pedal and the pedal was plugged in with a cable to the amp. Again it worked like a charm and there was no noticeable difference compared to using the pedal and amp with a cable. Later on I did play around with selecting a different channel on the transmitter. It takes a little getting used to, but the device beeps the 1-4 times depending on what channel it's on. You have to set the receiver to the same channel to get the system to work. There is no light to tell you that the two are on the same channel so you just have to keep pressing the channel button to get them to sync. Anyway, if you don't have a second guitar using the same wireless system it's best just to leave it in channel 1 and leave it alone. It will work well. While playing I moved around the house and it definitely has great range. It was fun moving into different parts of the house without worrying about getting tangled up in a long guitar cable.

Out of the box and onto the camera's hotshot: so simple to set up and use unlike other transmitter/receivers used in studio with strobes. Set the mode, set your channel to same channel as the receiver, release the shutter and "Your image" is captured. Use this Air Remote with the Profoto A10s.