Air Cooler Electric Fans Home Appliances

Ever since top vents started coming into vogue, I've longed for a case like this to make an appearance, and it's everything I wanted. The key differentiator of this case compared to most other, modern cases is that it has no vents on the top. For air cooling, this is ideal because you want air to go through the CPU cooler and out the back, not go out the top and skip the cooler entirely or come in from the top and screw up the flow direction. There is a slope in front of the top-mounted PSU that forces the incoming air from the empty space at the top of the front fans down into the CPU cooler. Then the GPU area is fed by additional fans on the bottom to ensure there's plenty of fresh air. This amount of airflow allows you to run the fans at pretty low speeds, being almost silent at 60% in the front and 40% on the bottom, while not significantly reducing the cooling potential. There are mesh filters in front of both sets of fans, keeping the interior a lot cleaner than it would be without them. The panels pop off nicely with some sort of magnetic or tension mounting. Overall, the design of the toolless access and working inside this case feels like an improvement over the Meshify C case I had before. Of course, there is one compromise. If you want non-nvme drives, it only has room for a couple on the rear of the motherboard panel, and there's not much airflow in that area, so I'd hesitate to use a spinning platter hard drive. At this point, I only use nvme drives and a separate NAS for storing media, so that's no problem for me.

Blows air like all the others but looks cooler doing it!

I use it for guitar amplifiers and home appliances - have been working great.

Much Better to install then a Air cooler

I have a small hatch back and was looking for a mobile power station to use with my electric cooler. The space in my trunk is very constrained and simply put, this knocks it out of the park. This unit easily runs my cooler for 24 hours, even in my confined trunk with minimal airflow. I have also been using it as a portable power station to run my Laptop, charge USB devices, etc. with zero difficulties. It really is as simple as plug in and go. The light weight is also a massive bonus and makes loading the car very simple!

Works just as described. Using with a MacBook Pro 15 and the cooler / fans definitely lower my temps a few degrees. My internal fans still come on at times, but typically at a much lower rpm and they don't stay on as long. My high temp area is in the upper / rear left side near the power, thunderbolt and USB ports so I have my MBP sitting lower (partially hanging off) on the cooler so the cooler fans and mesh holes will have a better impact at lower the temps in my MBP. I am powering the cooler through a 4 port USB hub and it works great. Only suggestion I have for the manufacturer is to expand the mesh hole area to eliminate hot spot. Works great for my MBP 15 although I do have to let it hang off a bit.

I am very happy so far with the performance on my Ryujin III 360 cooler kit. I changed from the Ryujin II to the Ryujin III and was presently surprised to find that it tames my 12900k. I can run my 12900k at 100% while running a miner and the fans never have to ramp up to keep the CPU cool. I don't normally mine on my 12900k, but I do game on the regular. Being that the fans never have to ramp up means that my gaming sessions don't incur extra noise from the fans while playing. I am sad that you can not display both custom pictures and the hardware monitor at the same time. Hopefully in the future Asus will change the software so that is a possible feature.

This case is great, plenty of room inside for the nvidea GeForce 3090 plus 6 fans, and a liquid cooler for the processor. Plus its heavy duty.

Reverse fans are great for the cpu heatsink if using one like the cooler master SL20 watch at the pic provide here , i recommend this fan especially from LIAN LI

I bought this one for my son and he loves it. I helped build it for him and he loves the silence--no fans. We use IcePipe cooler and passive PSU along with other silent hardware, such as SSD.