Android Battery Not Charging After Update

This Charger gives constant update as to the charge on both batteries and cuts off the charging for each battery, once charged. Highly portable and no need for extra cables.

I needed to update my Canon battery charging. The plus is the 5 volt output to charge phones and other devised!

For charging my android phone and connecting it to my desktop computer

Everything is good except the charging cord. Why did you change from the standard android?

The Genie One operates at about half or less of the volume (motor noise) of the original Genie. I had a VERY difficult time connecting to a brand new iPhone 12 to do the firmware upgrade and was about to give up and return it to B&H. I was able to update both of my 1st generation Genie Mini on the first try. The Syrp website suggests using an Android phone. I live in an all Apple household, and I was going to borrow a friend's Android, but tried one last thing. I have a 1st generation iPad Mini, and tried loading the newest version of the Syrp app onto it. That worked, so I tried connecting the Genie One, and voila, the iPad downloaded the update and loaded it onto the Genie One on the first try. There are some very nice upgrades to the app and device and all are compatible with the 1st generation Genie Minis that I have for pan/tilt. All in all a great system, but there were big hiccups on the firmware updates.

For the discounted price, it cannot be beat. Was able to update it to Android 11 without any problems was another plus. Very responsive; the camera takes very decent pictures; wifi reception was way better than my LG V20. The only problem is if you are coming from a bigger handset, this will feel very small and takes a while to get used to. The good thing is it fits any pocket and you don't guilty about replacing this phone after 2 years.

After ~5.5yrs, I noticed the internal cooling-fan began running full-time (quiet, but usually only runs if the batteries require charging, such as after an outage), and the usually-cool lower vents of the UPS were now a bit warm due to active charging circuitry. Then the normally 100% charge-level LCD indicator at times showed only 80% despite no outage. Time for a new battery pack! The most involved part was shutting down & disconnecting & eventually reconnecting all the protected equipment. After all was disconnected, out of curiosity I turned the UPS off & then back on - the charge-level indicator dropped from 100% to 60%! The old battery pack was in worse shape than I thought. Replacing the pack involved removing a couple screws at the bottom of the UPS & then sliding the face-plate down, then out. Then disconnect the power connector from the old pack, slide the old pack out, new pack in, reconnect the power connector & reattach the face-plate. Simple & quick! The charge level indicated 100% as soon as I turned the UPS back on - I let it charge for the recommended time anyway although I don't think that was necessary in my case because there was never any indication it was charging: the fan was off again & the lower vents cool to the touch again. My UPS seems to have a separate minor issue - a poorly connected LED that is supposed to illuminate the Power Button when the UPS is turned on. Instead, on mine, sometimes it's lit, sometimes it flickers, but usually it's off. The new battery pack didn't change that - the caution being that if the UPS has a more significant dysfunction, replacing the battery pack could be an expensive way to find out the issue isn't the battery pack. One last comment: Unlike APC, CyberPower unfortunately doesn't seem to have a recycling program for their spent battery packs.

After 13 years, the original Sony battery for my EX1 was only charging up one third and not holding it for long. Actually pretty good for a battery that old. Fully charged-the Watson is giving me over 5 hours of recording time and holds its charge. It acts like a new battery and at 1/3 price of the OEM, a bargain!

This is a slim, compact battery. After charging, I keep my spare snapped into my BC-TRW portable charger in the case with my camera, always ready to go.

I recently purchased this battery for a used Go Pro Hero 3 Black I was recently given. After charging this battery up and riding along with the original go pro battery and this one. After the original ran out of juice this battery did its job well. Even had power left after my ride which was better then expected. Love it so much I bought another one with the charging kit as well!