Are Water Heater Leak Detectors Good

We have a thermo pump for a/c and heater and a propane heater/water....easy to install, to configure etc....self learning is very dependable....the best part is that you can control the temperature from afar with the Nest app....We love our Nest thermostat!!

I have used Eneloop rechargeable batteries for a few years and they are excellent and durable. I used it on a gas water heater that needs batteries to create the spark that ignites it. I was unsure if it would work, it works perfect.

I have purchased the Life Saver Bag hoping to lighten my load when I traveled to a location for a shoot. I was going to return it thinking it wasn't going to work well. I am so glad that I kept it. You can use water or sand to fill up the Life Saver. I have chose to use water. I would fill up the life saver at the location and dump the water out afterwards making it easier for me to move it around. If there is no running water at the location, I will fill the Life Saver with water before leaving and put it in to a small plastic box just incase it does decide to leak and then I dump the water out afterwards. So far I had this Life Saver for about a year and have not had it leak on me yet. I use the bag to stabilize my c-stand for my wireless strobe. Couldn't be happier.

Here is the most important thing you will need to know... IT WORKS! Putting your 5D Mark III into a body of water with a $2500 dollar lens and a flash does not feel natural in any way the first time you ease it into the water. But life is life and if it was going to leak I was going to find out the hard way, It did not leak. Humidity packets that came with it got rid of fog. The only tricky thing is that you really need to dial in your settings before getting in there, or use it on full auto. I shoot in Pools in Manual and it worked fine with a bit of going back and adjusting settings again. Direct flash looks terrible underwater as it does above water, so I am still not sure I will use flash again for my underwater needs. Great thing is I can turn flash on and off through the housing anyways so, not a big deal to have there just in case. The plastic does warp your lcd image and makes it look cloudy, the first time I thought everything looked terrible until I took it out of the thick plastic housing. Bottom line, this works, and the company that makes it guarantees your gear in case of manufacturing failure. KEEP YOUR RECEIPT!

use it for toys and smoke detectors

Good performance overall. Very low wattage given the performance and runs cool so it doesn't serve as a heater.

Not much else to say. They do their job, never had a leak.

This lens heater does a good job keeping the lens warm. The thing you need to be aware of is that it draws almost 2 amps at any power level. Depleted my 20,000 mAh brick dry in about ten hours. Not a complaint, just an observation. Next time I won't turn it on until needed.

I bought this (actually 2 because it was such a good price) to protect a propane Monitor heater from surges/outages. We rarely lose power, but at least once a month will lose it for less than one minute (sometimes only seconds). Just enough to have to reset all the clocks - annoying. This heater needed a motherboard replacement ($600) due to one of these outages, necessitating the need for a UPS. I had been only using the surge protection of the previous UPS's because they didn't have enough backup power to keep the fan of the heater going, this one has no problem doing that. Definitely worth buying, especially for the price.

The toner doesn't leak into the machine.