Related products
Decksaver Cover For Blackmagic Atem Min, Mini Pro, Mini Pro Iso
$164.97 $224.36
Jason Cases Blackmagic Atem Mini Extreme Case
$987.00 $1,391.67
Jason Cases Pelican Case For Blackmagic Atem Mini
$837.00 $1,180.17
Decksaver Cover For Blackmagic Atem Mini Extreme / Iso
$164.97 $257.35
Jason Cases Blackmagic Design Atem Sdi Extreme Iso Case
$1,137.00 $1,728.24
Blackmagic Design Atem Sdi Pro Iso Switcher
$2,385.00 $3,720.60
Portabrace Rigid Case For Blackmagic Design Atem Mini
$454.35 $690.61
Blackmagic Design Atem Microphone Converter
$1,185.00 $1,741.95
Boya 35c-xlr 3.5mm Mini Jack To Xlr Converter
$37.50 $58.50
Datavideo Se-3200 12-input 1080p Video Switcher
$16,497.00 $19,796.40
Chrosziel Top Bridge (no Rods)
$1,860.00 $2,418.00
Qnap 550w Power Supply Unit
$675.00 $884.25
Blackmagic Design Atem 4 M/e Advanced Panel
$55,455.00 $68,764.20
Firefield Carbine 10.25" Floating Quad Rail (black)
$149.91 $203.88
Blackmagic Design Power Supply For Atem Mini Extreme (12v, 60w)
$237.00 $355.50
Xlcs Designs 12 Vdc Power Cable (7.8")
$35.97 $43.52
Skaarhoj Eth-gpi Link Dual Interface
$2,985.00 $4,477.50
Vicoustic Iso Blanket Pro Acoustic Treatment
$957.00 $1,234.53
Guess you like it
Kowa C-mount 1.15-1.47x 2/3" 5mp Telecentric Macro Zoom Lens
$2,692.50 $4,146.45
Barska 10x50 X-trail Wide-angle Binoculars
$88.29 $109.48
Lacie 1tb Rugged Mini Usb 3.2 Gen 2x2 External Ssd
$389.97 $612.25
Skb 22" Iseries Cymbal Flyer
$1,274.97 $1,912.45
Benro Ac4 Aluminum Center Column For 4 Series Tripods
$90.00 $116.10
Dry Lam Polyboard Paper Trimmer (12")
$384.45 $465.18
Countryman E6i Omnidirectional Earset Head-worn Microphone (beige)
$1,218.39 $1,754.48
Leitz Cine 75mm T2.0 Summicron-c Lens (pl Mount, Marked In Feet)
$45,000.00 $63,000.00
Ikan Elements Pair Of 15mm Rods - 18"
$119.85 $155.81
Silynx Communications Foam Earplugs (large, 3 Pairs)
$30.00 $37.50
Atem Mini Microphone Input
Mario | 2024-07-04 08:58:47 |
It worked great to connect the mixer to the ATEM mini Pro audio input. 5 |
Erik | 2024-06-19 05:46:17 |
I just updated my CineView HE to the current firmware. While I'm not noticing much difference with the transmission itself, there was a notable difference on my ATEM Mini Pro. Camera Input 1 on the ATEM Mini Pro is slightly different than the other camera inputs. When the CineView was connected to the camera 1 input it produced the green and pink hue. After the firmware update, the camera 1 input works normally. Very happy with this update! 5 |
Stephen | 2024-05-09 07:14:10 |
I've used the ATEM Mini Pro Iso for a couple of years now and haven't really had an issue with it when I plug my cameras in directly to the switcher. However, recently I started using wireless units from Hollyland with the ATEM and Input 1 gave me the pink/green screen due to the input only accepting YUV and not RGB (Inputs 2, 3, and 4 accept either YUV or RGB). I got this unit just hours before it was needed in a show and once I found the right setting, BOOM! Input 1 cleaned up and looked like my other RGB inputs. Settings were changed with the USB utility from Decimator's website. In case anyone else needs to know, the settings are HDMI YPbPr 4:2:2. 5 |
Christine | 2024-06-07 06:47:46 |
I tried 3 other splitters to send signal from computer to both the projector and an input of the ATEM Mini over a BMD HDMI to SDI to HDMI signal path. I got either flickering or the green screen of death. FINALLY, right out of the box, this splitter did the job. 5 |
Eric L | 2024-09-17 03:47:54 |
this did just what I wanted, used it between my ATEM mini and computer 5 |
Natasha | 2024-06-19 03:39:53 |
Bought for of them for the atem mini and they work great 5 |
J | 2024-08-14 03:55:18 |
I use this to connect my PC to both a monitor and ATEM Mini Switcher. 5 |
Juan | 2024-04-01 06:46:35 |
This thing is perfect to cool my Atem Mini Extreme Pro. 5 |
Robert | 2024-08-24 01:41:55 |
Perfect replacement for the ATEM Mini Pro power supply. 5 |
Alan | 2024-05-07 07:42:24 |
I use this to get a multi-camera view from my ATEM Mini. Works great! 5 |