Best Air Cooling

Easy setup; fast performance, and air cooling is surprisingly effective.

Fantastic cooling pad! I've been a professional DJ for 35 years and this pad is definitely the best!! Don't even look any further! Best of ..... TheDJ Big Ant

Cooling systems of modern computers (and indeed all art) based on the principle of hot air extraction system components. This removal is performed, usually by different fans. Some pumped air into the system unit, the other lead him outside. Thus, together with the air, there will inevitably flies and dust. Over time, if no action is taken, the dust becomes indecent much.Clogged radiators, heat worsens. And from an aesthetic point of view is much nicer to have a clean, though just a block from the counter, and not a huge wad of dust. Let's not forget about the keyboard. What does it sometimes just will not find under the keys.There are many ways to get rid of dust. Someone is using a vacuum cleaner, someone just take and how to blow on the problem area, and some arm with a can of compressed air. Do not forget about the compressors, they also do an excellent job purge. But all methods have their drawbacks. Vacuuming not zatyanesh dust in hard to reach places, his breathing very little that can be blown off. Good compressors under an hour cumbersome, and not all have them. Compressed air cylinders unnecessarily expensive pretty quickly come to an end and not have too powerful airflow. Every man for himself chooses. You can never clean) As practice shows, a computer without care can work for a long time. Much longer topical. But we love cleanliness and order?)

Ever since top vents started coming into vogue, I've longed for a case like this to make an appearance, and it's everything I wanted. The key differentiator of this case compared to most other, modern cases is that it has no vents on the top. For air cooling, this is ideal because you want air to go through the CPU cooler and out the back, not go out the top and skip the cooler entirely or come in from the top and screw up the flow direction. There is a slope in front of the top-mounted PSU that forces the incoming air from the empty space at the top of the front fans down into the CPU cooler. Then the GPU area is fed by additional fans on the bottom to ensure there's plenty of fresh air. This amount of airflow allows you to run the fans at pretty low speeds, being almost silent at 60% in the front and 40% on the bottom, while not significantly reducing the cooling potential. There are mesh filters in front of both sets of fans, keeping the interior a lot cleaner than it would be without them. The panels pop off nicely with some sort of magnetic or tension mounting. Overall, the design of the toolless access and working inside this case feels like an improvement over the Meshify C case I had before. Of course, there is one compromise. If you want non-nvme drives, it only has room for a couple on the rear of the motherboard panel, and there's not much airflow in that area, so I'd hesitate to use a spinning platter hard drive. At this point, I only use nvme drives and a separate NAS for storing media, so that's no problem for me.

Quick setup & protects SSD from vibration and gives plenty of air flow for cooling

I grabbed this case to do a new build. I had a Fractal Define C with my previous computer but air flow was restricted and I planned on air cooling my new 5800x instead of water cooling like my old one. Building in this case was very easy, I used the stock case fans for exhaust and put in Noctua fans for the intake. I plan on eventually getting the hot swap plate for the back of the bottom drive bays when the time comes that I need more storage. Great case overall.

I am not using these fans for cooling my computer, but for moving warm air around my camper. They are quiet and able to move warm air from the main section of my camper to the bedroom. They also draw only an amp or so and thus preserve the battery. 6 year warranty and well made. Highly recommended.

I got a new furnace and central air unit and the Heating and cooling company that I won’t with offered the thermostat. I like how I can get up in the morning and turn the heat up and then get out of bed

Pros - Beautiful looking case. Great cooling - front fans really move air. Full size ATX motherboard fits great/ no issues. Cons - Only Con I have is the machine work on the case for the thumb screws seems like shoddy work. The thumbscrews do not move easily like my old case.

Note: This case is truly WHITE (what I wanted). But the stock photo is a silver'ish looking case with white internal. This case was intended for water cooling, however this case still has fantastic temps even when air cooling only. I've been building custom PC's since the late 90's and I must say this is my favorite. +Modular design allows you to build the PC you really want to +Great temps for watercooling or air cooling only +Sturdy chassis (very little flex) +Tempered glass panel (not flex acrylic) +Looks very minimal and not gamer'y +Plenty of accessible ports on the front of the case +Fantastic HDD/SSD (SATA) mounting options in the hidden bay -Case is pretty heavy, as it's made of steel and glass -More USB-C ports in the front would have been nice