Calculate The Power Supplied To A Circuit

Supplied power to Shure QLXD4.

The feature set is rich and the power specs are optimal for a 15amp circuit.

Recently I had a disastrous power burn out which. affected ALL circuit systems including my favorite stereo receivers. As an artist, music is an essential part of my production projects- working with NO receiver is like spaghetti with no sauce.Within 3 days you saved my life the Onkyo receiver saved my creative life! Thank You!!

I bought the EcoFlow Delta Pro with extra batteries and a solar panel for emergency backup mostly but it has many other uses. Recently I had a faulty circuit breaker in my home that kept popping the circuit that powers my refrigerators and freezer. Having the Delta Pro allowed me to shut down the house power and work safely on the electrical panel and allow me to troubleshoot to find the faulty breaker and have it fixed. Had my two refrigerators, one 18 cubic, the other 22cubic foot, chest freezer and a couple of lights and a floor fan, all running about 10 hours of normal use, while I had my faulty breaker replaced and had the home service panel serviced for additional problems as well. Only used about 47% of the batteries total charge and probably could have run it the following full day before it would have run out of power. Could of use this unit last year when we lost power for three day in February in Texas. That was a long three days. Now I am prepared for future power outages. Attached are photos of how I set up my unit.

I needed a single power strip for all of my stereo equipment in a rack. I have a 20 amp circuit so I needed a power strip that could handle the load. This one does. The LEDs are very bright but I covered them with a dark cloth. I can still see them, but they're not a distraction. Keep in mind it requires a NEMA 20 amp receptacle with the turned blade.

It works as expected, connects easily and provides extra power. It does require a 20 amp circuit for charging, which I did not see in the requirements in the downloaded manual. It allows it to recover faster, but was unexpected.

I'm using this extension cord to power my flash strobes and my Video LED lights in my studio and on location. Plus I'm tired of those ugly orange cords which is a sore thumb. having it all black is soooo much prettier. It blends with my AC cords and almost disappears on Set. Every extension cord follows electrical codes which most people often forget to check their rating and plug in just about anything. This cord, with a maximum Load of 13A, 125V, 1625W, which is exactly the MAXIMUM load you can have anyways on a standard 15 Amp outlet, PER CIRCUIT with nothing else plugged in that circuit. If you exceed the load on this extension cord, you are also exceeding the permitted load on your outlet / circuit, therefore, this extension cord does the job right. 20 Amp circuits are usually commercial facilities, which allows you to load more, but again, don't forget the ratings on the extension cord, found on its labels. Plugging in TWO 600 watt LED lights, is approaching your load limit by 70% on a home circuit. The Watson 3-Outlet Power Extension Cord is easy to wrap away as the cord is a softer PVC. When dealing with halogen lights, make sure this cord is nowhere near that heat beam or ON the light's body, like most extension cords shouldn't. Don't allow people to step on electrical cords or place heavy items on top, so they don't get damaged or cut when crushed. I also like that I can plug in a large DC power adapter without getting in the way. (see pictures) Very happy with it and it does what I need. [I have received this product in exchange for my honest review]

I bought this for providing audio during film shoots. The design seems really tough, all metal construction. Looks like something that could be dropped on the floor a few times and still keep working. Good clean amps, but not a huge amount of gain. A few very minor critiques: uses AAA batteries ( I would have preferred AA as everything else on set uses AA), case is easy to open with ballpoint pin but can be put on backwards and then does not quite lock when closed (either make it impossible to put on backwards or it should lock when on backwards), two internal circuit board switches (mono/stereo and low/high power mode) the low/high power switch is hidden and not easily visible. It is a little awkward to have to access circuit board switches to adjust these settings. Overall very happy with the product.

I change my review to a four. The issue with the error pertains to amount of power required at start-up. If the power is too great, just as those associated with hair dryers, the circuit (GFCI) will trip/default. It has been my experience that the power socket/outlet can not interface with a GFCI receptacle. Furthermore, some batteries lack the necessary power/amps required at start-up. The solution is to use a strong battery source and/or circuit not connected to a GFCI. This information should be printed on the material. Bottomline: these are great strobes if powered from a source that can handle to amp, without disruption at start-up. The strobe will work flawless afterwards.

Today's refrigerators have low voltage circuit boards (mine has two)that are susceptible to power surges and outages. This product is small and powerful, and perfect for protecting one appliance. I bought four, one each for the main fridge, the garage fridge, the garage freezer, and a spare.