Cheap 50 Ft Ethernet Cable

I was very pleased that I had the option to order the longer 10 ft USB Ethernet cable, because I am moving house and will have a slightly different set-up.

comparing this cable to the 200 ft SDI cable this 50 foot was much heavier. I sure it will last longer.

Worked as advertised. Used for a live concert with a 50 ft run of cat6 cable. Plug and play, no issues. No signal loss or latency issues. Highly recommend

I never thought a “50 ft XLR cable would do the job for me. It functions properly while fully unattached. I recommend this product!

A deep channel and sturdy construction makes it ideal for a 50 ft 240 volt cable across my yard and into the driveway for charging my EV, along with a 120 volt cable for a PHEV.

We had a 50 ft cable that connected a digital piano to our mixer and that cable introduced noise into the system. We replaced the cable with this connector and the Shure transmitter and the noise is gone.

Using 3 sends to 3 tvs, 2, 50 ft.

Not much to say about an ethernet cable, except that it works.

This is by far the best non-Ethernet home networking solution on the market delivering near 1G Ethernet speeds.� There were some teething issues for me that I had to resolve, but since then my three adapters have been rock solid.� So much so I just bought 2 more. A few tech notes from the issues I had to resolve.� High frequency bandwidth is everything for these adapters.� Make sure you have RG6 wires, this should not be an issue if using cable wiring preinstalled in the last 30-40 years or more recently by the cable company.� In my case the in wall wiring was OK with RG6 cable.� However a previous owner had used cheap R59 jumpers (with cheap twist on terminations) between a rat's nest of cheap Radio Shack splitters that couldn't pass more than 1 GHz.� I bought a higher quality 6-way splitter rated up to 2 GHz.� I also found that having a filter designed to contain the MOCA signals within the house was an absolute necessity.� This filter is installed at the input to the splitter for me.� I think the filter either addressed a high frequency impedance issue or controlled signal reflections that were causing issues.�� As an aside to anyone who cares, these adapters do pass VLANs and probably any other Ethernet L2 items like jumbo frames and the like.� I believe all MOCA adapters do is to encapsulate Ethernet frames and seamlessly pass it over the MOCA network.

Great Syandard Ethernet Cable. i uaed to buy audioquest items, found that theres no actual upgrade to that to a cheap cable. this is more than enough. buy pearstone great company