Circuit Breaker Box With Bluetooth Receivers

I bought the EcoFlow Delta Pro with extra batteries and a solar panel for emergency backup mostly but it has many other uses. Recently I had a faulty circuit breaker in my home that kept popping the circuit that powers my refrigerators and freezer. Having the Delta Pro allowed me to shut down the house power and work safely on the electrical panel and allow me to troubleshoot to find the faulty breaker and have it fixed. Had my two refrigerators, one 18 cubic, the other 22cubic foot, chest freezer and a couple of lights and a floor fan, all running about 10 hours of normal use, while I had my faulty breaker replaced and had the home service panel serviced for additional problems as well. Only used about 47% of the batteries total charge and probably could have run it the following full day before it would have run out of power. Could of use this unit last year when we lost power for three day in February in Texas. That was a long three days. Now I am prepared for future power outages. Attached are photos of how I set up my unit.

This is a very solid, flexible dimmer pack. Very easy to set up. I like the easy to reach circuit breaker for each channel. Highly recommend for the price.

Great protection for your gear. Circuit breaker no lag in ethernet. A ton of outlets . Have not had to put it to test in terms of a shortage or outage but based on the specs I'm confident. Confidence is key. You can quote me on that.

Ace Hardware sells an on/off toggle switch you can use with this. Plugs right into your monster circuit breaker ;-). I could have wired an in line on off switch but for that price, I'll have another beer, lol. As for the rest this item, can't really be beat for the price anywhere. Unless you start spending over 1k this is the ticket.

Expensive for what it is but needed with old transmitters and receivers. You must be comfortable with soldering and equipment maintenance to install this. I have 10+ years of circuit repairs and this was nothing for me but to someone new with small circuit soldering, you may want to go slow.

Bluetooth works great is made to hook up to receivers with no pre amp

The HS210 wi-fi switch came with everything needed to make the wiring connections. The electrical box I have is deeper than the standard box, so accommodating� the somewhat large switch and the wiring was not a problem. Wiring is straight forward if you are familiar with wiring a 3-way circuit. Be aware that a neutral wire is required and not all switch boxes will have a neutral. In my case, I only needed one of the two switches in the box to make the circuit work correctly.� This may not be true in all cases. I'm going to use the second switch on another circuit.� The switch works flawlessly so far. Setting up the switch with the Kasa app was fairly simple. I just followed the directions in the app.� The only problem was I only needed one switch instead of the recommended two. The first switch was no problem, but the app would not let me continue, or quit without setting up the second switch, which I was not going to do.� I had to restart my phone to exit the app. The first switch worked as it should without having to set up the unused switch. The restart button located just under the switch is very touchy.� The switch restarted several times while I attached the cover plate. I used a double switch plate instead of the cover that came in the box and I had to make a few adjustments to get the cover to fit well over both switches. All in all, a very nice switch.

I purchased two different (and much cheaper) Bluetooth receivers prior to the B1. �Both would cut out again and again even when my iPhone 8+ was only a foot or two away from the unit. �The B1 has not failed me once and it works as far away as the upstairs floor above the unit. �No drawbacks that I can see other than some audio quality loss at louder volumes. �Highly recommend.

This paired easy with my Samsung S8 phone. It has much better sound quality than other bluetooth receivers i have used. It has great range too. My only conplaint is that the holes in the rack ears are too small for #10 screws so I had to drill them bigger to get it mounted in the rack.

I've had a number of Bluetooth receivers over the years. They have all suffered from limited range, frequent dropouts and pretty mediocre audio. The B1, has eliminated these problems. Range is superb for a Bluetooth device and the audio response is superior to anything else out there. An added bonus: most Bluetooth receivers lack the output to drive my SET and push-pull tube amps to there fullest. That is not an issue here, plenty of clean, noise-free output! Plus, this box is built to last, no cheap plastic enclosure here. A welcome addition to my audio lineup!