Corsair Rgb Headset No Device Detected

Roomy, Enough air for my gigabyte gGPU3090 extreme, Gigabyte Aorus extreme MB and my 1200 watt PSU which is hidden behind MB in separate space. I replaced corsair carbide spec-delta with it due lack of room to may components. This case did not have fans so i moved fans from corsair case and all fit perfect. RGB is great ( i'm not a fan of RGB generally).

I upgraded from 16Gb of corsair vengance rgb to this 32Gb set of rgb kingston and will never go back. This kingston ram has vibrant colors and is compatible with all of my rgb sync technologies in my 3 PC's. Also it stays cooler than my corsair but has a lower profile which allows for better fitment of cpu coolers. Also have it overclocked to 3600 MHz and still stays cool under pressure.

This case is amazing. It is as though Lían Li really made the best case of every kind. It is not too big and not too small is very versatile and has room for up to 3 rads. It comes with 3 RGB fans, ventilated PSU shroud with mounts for SSD or Fans, no need to take the shroud out because the mesh side panel folds down for easy access. The Hard drive cage can slide back to make room for a 360 rad in the front, or slide it all the way forward to maximize PSU access. If you want , just take the cage out. They offer a kit to make the cage hot swappable. Two shrouds make cable management problems just “disappear.” Two beautiful glass sides are held in place by magnets and swing out to be removed without any tools. My only issue: you must purchase a USB type C kit to put in the top of the case-this should have been included. If you don’t need USB C you are stuck with a rubber plug on top to cover the hole. A separate LED diffused strip can be purchased to add to the front side glass housing and looks awesome. You can get an adapter on eBay to make these work with Corsair Commander Pro or use Lían Li’s new software. Cable management loops everywhere and plenty of room behind the motherboard tray for fan controllers, LED Hubs, SSD’s, and custom extensions. It doesn’t really get much better than this for the price. Well thought out and beautifully executed. The smartest front panel setup you ever saw. There are 4 optional ways to mount rads /fans by flipping the tray or using different slots-so smart! I am running a Z390Aorus Ultra, i9-9900k, 32gb or DDR4 14CL memory from GSkill, 240mm Corsair AIO, 6 120mm LL series rgb fans connected to a Corsair Commander Pro and RGB hub. Thermals on the CPU stay cool even over locked to 5.1@1.325v. Never get above 78-79 running Cinebench 20 for 30 min. GPU is 2080super OC and never gets above 60-62. There is so much to like about this case, the paint job is flawless, every detail is thought of. Excellently engineered and beautiful.

Fits perfectly in my Corsair 5000X case. Runs fairly cool never gets over 165F. (I stick with farenhieght). Crushes Furmark at maximal settings. Can run for hours at maximal settings in a burn-in and stay at 160F. RGB lighting is good. RGB Fusion, as usual, stinks (wish Gigabyte would put a little development time into that.) Clocks a little above the FE and with the RGB lighting it's worth the $100 over the FE price. Anti sag bracket is sturdy and should work well and seems to attach where the maximal downward force vector would be. If you are in the market for a 4090 get this one. It will serve you well!

I had to replace the front and rear fans with Corsair RGB fans to get a better color display and compatible hub controller and it really should have a USB C port in the front panel but overall the quality of the case is good and the components were easy to install.

Inserted int NAS ... detected and added to RAID. No issues.

Great set of filters which is the exact combination that you need. No optical issues detected.

This works very good for the iPhone 13 Pro, but the instructions aren't good to explain how to use it well. If you plug it in with a lighting-usb cable and then turn on the device, it will not be detected to use as an audio device but will be detected in the Rode Central App. If it turn it on and then plug it in, it will be detected and usable with Filmic Pro and the Camera stock app. Make sure you toggle AAC if using Dolby Vision. If you use the USB cable, your audio will be line level but will ignore all the dB boosting done on the device. However the audio will be in stereo so you can use both inputs to mic up a talent or for 2 and use which ever channel is better. Post audio processing will still have really clean audio when normalizing and doing simple cleanup. If you use the provided cable and connect it to a lighting-3.5mm mic input then dB boosting will work. However the audio will only be the sum of the audio sources in mono. A good situation using this is you can use it with a Shotgun mic such as the MKE-600 that uses a AA battery to self power for phantom power and plug it in one TX using the 3.5mm input and the use the other TX as a lav mic.

This is an awesome device. It durable and well made. I love the speed transfer and of course the RGB.

After plugging it in, it is automatically detected for adoption. This was almost instant. No issues with adoption, but remember to set the automatic powercycle on connection failure in the controller if you want to use the plug in this manner. After setting this in a browser (setting is not available in the mobile app), it works as expected.