Cpu Cooler With A Cat Logo

Runs very well and the cpu cooler that comes with it is amazing!

Great CPU but it overheats a lot, definitely need a better cooler.

Works great in my system - i will say the cpu cooler that comes with it can be pretty loud but thats the only complaint!

It is a quite and solid built CPU cooler. Easy to install, worked perfectly.

Great cpu cooler! Works well! Looks great! Easy to install!

Faster than a scalded cat and way hotter. I put the biggest available water cooler on it and was still able to reach 100% thermals without overclocking. Still, it benchmarks like a beast. If you want the fastest processor on the planet, this thing is the cat's meow.

Very easy to put together. Cools my CPU excellently. I love the RBG fans & Logo on the Pump.

Ever since top vents started coming into vogue, I've longed for a case like this to make an appearance, and it's everything I wanted. The key differentiator of this case compared to most other, modern cases is that it has no vents on the top. For air cooling, this is ideal because you want air to go through the CPU cooler and out the back, not go out the top and skip the cooler entirely or come in from the top and screw up the flow direction. There is a slope in front of the top-mounted PSU that forces the incoming air from the empty space at the top of the front fans down into the CPU cooler. Then the GPU area is fed by additional fans on the bottom to ensure there's plenty of fresh air. This amount of airflow allows you to run the fans at pretty low speeds, being almost silent at 60% in the front and 40% on the bottom, while not significantly reducing the cooling potential. There are mesh filters in front of both sets of fans, keeping the interior a lot cleaner than it would be without them. The panels pop off nicely with some sort of magnetic or tension mounting. Overall, the design of the toolless access and working inside this case feels like an improvement over the Meshify C case I had before. Of course, there is one compromise. If you want non-nvme drives, it only has room for a couple on the rear of the motherboard panel, and there's not much airflow in that area, so I'd hesitate to use a spinning platter hard drive. At this point, I only use nvme drives and a separate NAS for storing media, so that's no problem for me.

been using this CPU for a home built server I'm running and it does great. the Stock cooler that it comes with is more than enough as well, keeping the temps relatively low

This CPU skew does not come with a CPU cooler in the box. However not a problem as you should really use a good third party cooler. Make sure that the one you buy will clear the Motherboard components around the CPU and the height of the fan will fit the case you want to use. While this CPU internal graphics will support 8K/60 and 4K/120 not all motherboard will support the higher resolution to the external MBs HDMI. For example the MSI MPG Z690 CARBON WIFI LGA 1700 ATX Motherboard has a HDMI 2.1 port but only supports upto 4K/60 pass through.