Crosslink Wheels Rear View Mirror

These radios are amazing. Installed in my Jeep above my rear view mirror and I am stoked about it. It’s small enough to not be in the way but is great for communicating with fellow Jeep’s. I used the ghost antenna so that it didn’t get wiped out by limbs on the trail. I’m thinking of purchasing the 6db antenna to help increase my range. I feel you can’t go wrong with this radio! Will be purchasing another for my sons Jeep.

In the mid-1980s I bought a Nikon 7.5mm f5.6 circular fisheye. Being an older design (1966) its rear elements protruded into the mirror box. Fortunately my F3 had a hard physical mirror lockup. The external viewfinder for this lens attached to the camera on the original Nikon F/F2’s proprietary flash shoe. I was able to buy an AS-3 flash adapter for the F3. With the F3s mirror locked up I also had to use an hand-held light meter. With amazing depth of foield focusing was never an issue. The old zoom lens had six filters on a wheel. One was a skylight and the other five were strongly colored for B&W film. While I liked the circular results, using the lens was a hassle. I often had my shoes or forehead in the picture. On a sunny day, my images suffered from solar flares. My new Nikon 8-15mm AF-S fisheye has none of those old problems. It fits on my DSLRs without any problem. It doesn’t need an external finder or separate light meter. At the 8mm setting (and lens hood off) I get a circular image very much like the vintage fisheye. The new lens is faster and focusable. Like my 14mm f2.8 Nikkor, this zoom uses gel filters inserted in the rear of the lens. I really don’t like this arrangement. This fisheye is similar in weight and size to the 14mm lens. I am also not fond of the electronic aperture control first seen on G lenses. Without an aperture ring one cannot use this zoom on older cameras. At the longer end of the zoom range (12-15mm) the image fills the (FX) frame and lens hood stays out of the way. This image is similar to my inexpensive Bower (Samyang?) 8mm fisheye with its fixed lens hood (and DX coverage). So far I haven’t used my new lens much but I think I will like it.

This works well as a head strap but it also works if you want to use it to wrap around something that may be easily scratched. This could mean the side view mirror of a car or maybe just to wrap around your pet. Over all, this product is one to have handy.

I've been using these racks for years in my real life as an A/V contractor. I suspect this would be equally applicable if you're an IT professional or anyone else who has a need for high quality rack enclosures. The SRK Rack is available in 8, 12, 16 and 21 space models. It is all metal and is furnished with high quality wheels, one pair of wheels is equipped with locks for stability. It is shipped unassembled, all assembly parts are included so you can build the configuration you need. Rack rails are installed front and rear and are reversible for use with either U.S. standard rack screws or European thread screw sizes. Both sets of rack screws are included! It does not come with doors, front or rear. If you need a rack with security doors, you must upgrade to the SRK Pro series. The Pro series is a little more heavy duty and security doors are available. In summation, the SRK Universal Rack series is absolutely the best value I've found. It is only slightly more expensive than the economy racks that are available, it is all steel construction, has rack rails front and rear and a great set of wheels.

Reasonably compact, when folded up, for the weight its rated for. Fold down rear wheels for top heavy loads are a life saver.

My original rear wheels were shot, the treat had torn off. These are great, much better than the originals.

I already had the R12 cart and wanted something a little beefier and that handled gravel and grass better. This cart does just that. The wheels are wider and the tubing is significantly beefier, emphasis on the beefier part. The cart itself is actually lower than the R12 which is great for my purposes, loading it in and out of an SUV. Upon arrival I had to made some modifications to the cart, like greasing the wheels, drilling some of the pin holes so that the rear wheels would fit on, glue one of the slider plates and fix one of the rear wheel bearings. This thing was made in Malaysia. All of that aside, this thing will last a while, I do not expect the cart itself to break, but the wheel bearings will wear with time, as with anything else. I also recommend replacing the grip tape with something more rubbery that actually grips bins better. I've also made some mods to my cart, to allow stands and things to be mounted to it. Like this review so that I will make a video review. :) I am overall happy with this purchase.

These wheels are a major upgrade over the original 6x1.5” wheels that came on my R14 cart. They are a touch taller than the original wheels, so if you don’t upgrade the rear wheels at the same time your cart might have a slight rake to it. Not an issue since I always use the handles in the up position, but thought I should mention it. They are also WAY wider than the original rear wheels, not a problem, just an observation. I think they are super smooth and make the cart feel brand new again.

This rear cam is small enough to not interfere with your view out your back window. The picture quality is great!!!

This is my second dash camera from Garmin. I use it for a rear view. The size is phenomenal. It doesn't attract attention. Very good software. Voice commands are very well designed and functional. It syncs with the front camera and works very well with the parking cable. The image quality is pretty good.. Higher resolution would require a lot more disk space.