Data Cable To Ethernet Adapter

Not much to say about an ethernet cable, except that it works.

Not much to say, it's a USB to Ethernet adapter. Works exactly like you would want it to.

I purchased this to increase the WiFi coverage in my house. I was considering purchasing 2, but started with 1 just to see the coverage. Overall, I get about 25% better signal at each end of the house with this set up in the center so an improvement over the WiFi router my ISP provides. I have basic networking experience and the software was a breeze to setup. I really think anyone could do it, but give yourself a good 15 mins to click around and understand their web interface. I simply plugged an ethernet cable into my existing WiFi router, then into the PoE adapter that came with the AP. Then just ran a second ethernet cable from the PoE adapter to the AP. Mounted it on a wall with their hardware and was done, took less than 5 min total.

I needed to attach an Ethernet cable to a MacBook (of course no ports on the MacBook) so I got this with an adapter so I could use the cable and then the adapter with USB to plug into the laptop. Once the correct driver was installed for the MacBook / adapter all worked great. Instructions for all could be better. Thanks to B&H for super advice and support!

I'm using this with my Macbook Air that only has USB-C ports and no ethernet port. This adapter worked right out of the box to give me an ethernet connection. Just plugged the ethernet cable in to the adapter, connected the adapter to the CPU's USB-C port, and my computer connected to my work network flawlessly. The wifi at my work is not great, so this adapter is giving me a fast network connection now through ethernet. I did a speed test and I'm getting approximately 500mbps upload/download speeds with this adapter, which is fantastic. I also appreciate that the adapter has LED indicators. One light shows there is a connection (green). The middle light shows there is power (White/blue). And the 3rd light blinks orange to show there is activity. Having these lights could come in handy if I need to trouble shoot, which is very helpful. The build quality is also really good. This feels like it will last a long time. The cable seems sturdy and the ethernet cable plugs in securely into the adapter's port. Overall, I'm happy with this adapter and it is working very well. [I have received this product in exchange for my honest review]

Short Ethernet cable that works.

Ethernet cable wet dream.

A Ethernet cable that works! And it was low cost.

I had several internal drives that I salvaged from an old PC. I was searching for an affordable way to make use of them. This enclosure provided a simple, affordable solution to my problem. The unit arrived in pristine condition in a factory sealed box. The manufacturer included a power adapter, a SATA 3 data cable, two sets of screws and a small screwdriver. I had a 2TB HDD up and running in my case in about 10 minutes which included time to unpack the drive and review the enclosed pamphlet To use the enclosure for multiple HDD's (one at a time), simply open the case, insert a drive making sure that you connect the drive to the receptacle in the case, close it and connect the power adapter and the data cable. If you plan to install a drive permanently or move the drive frequently, use four of the enclosed screws to hold the HDD in position to prevent the drive from becoming disconnected.

The adapter is exactly as descried except for it's length. Total tip to tip length is 5 5/8". The cable length is 3 5/8". It transfers data well at usb 2.0 speeds. They leave out the best part though, it has plastic to peel off. It was so satisfying to peel. Also, it came in a nice little baggie that smelled a little like Rice Krispies without milk.