Dial Air Cooler Electrical Connection Box

Blows air like all the others but looks cooler doing it!

Much Better to install then a Air cooler

Nicely made tubes that have the electrical connection to work with most of my current plus some older lenses.

Works as expected. FYI, it does not fit a standard electrical box.

I have a 15+ year old B+W subwoofer that started humming for the first time. I tried a couple of things regarding its electrical connection and that was not the issue. I searched on the internet and found this item at B+H with great reviews. It has been attached for two weeks now and no humming since. Thanks B+H!

Awesome performance but runs a bit hot. Nothing a good air cooler can't handle though!

This chip comes close to the performance of the X-version. Except with lower power and temperatures. An air cooler can handle this cpu, no problem.

Ever since top vents started coming into vogue, I've longed for a case like this to make an appearance, and it's everything I wanted. The key differentiator of this case compared to most other, modern cases is that it has no vents on the top. For air cooling, this is ideal because you want air to go through the CPU cooler and out the back, not go out the top and skip the cooler entirely or come in from the top and screw up the flow direction. There is a slope in front of the top-mounted PSU that forces the incoming air from the empty space at the top of the front fans down into the CPU cooler. Then the GPU area is fed by additional fans on the bottom to ensure there's plenty of fresh air. This amount of airflow allows you to run the fans at pretty low speeds, being almost silent at 60% in the front and 40% on the bottom, while not significantly reducing the cooling potential. There are mesh filters in front of both sets of fans, keeping the interior a lot cleaner than it would be without them. The panels pop off nicely with some sort of magnetic or tension mounting. Overall, the design of the toolless access and working inside this case feels like an improvement over the Meshify C case I had before. Of course, there is one compromise. If you want non-nvme drives, it only has room for a couple on the rear of the motherboard panel, and there's not much airflow in that area, so I'd hesitate to use a spinning platter hard drive. At this point, I only use nvme drives and a separate NAS for storing media, so that's no problem for me.

Coupled with a Noctua NH-D15 air cooler and everything at stock/default settings, I encode hour long videos using. The CPU was at usage 96% capacity, temp at 65C with the CPU fan at 575 rpm and all cores running at or above 4.2GHz. Haven't tried overclocking yet, but looks like plenty of room. Certainly is great performance straight out of the box

Very happy with the Elements External drive with it sitting on a laptop cooler blowing air up through the drive. Stays at 42 C in a 23 C room. I would not be happy with the drive temperature otherwise. Had to assign a drive letter in Windows 7 to the external drive to access the drive. No issues after that