Diy Ethernet Cable Powered Channel Selecting Footswitch

I purchased the Xvive wireless guitar system based on a number of positive YouTube reviews. I figured for the price that it would be worth it if I could get it to work. I first tried it by inserting the transmitter into my PRS and the received into my Mesa Boogie amp directly. Worked perfectly. I didn't mess around with selecting a channel so I suppose it just worked with the default selection. I next plugged the receiver into an overdrive pedal and the pedal was plugged in with a cable to the amp. Again it worked like a charm and there was no noticeable difference compared to using the pedal and amp with a cable. Later on I did play around with selecting a different channel on the transmitter. It takes a little getting used to, but the device beeps the 1-4 times depending on what channel it's on. You have to set the receiver to the same channel to get the system to work. There is no light to tell you that the two are on the same channel so you just have to keep pressing the channel button to get them to sync. Anyway, if you don't have a second guitar using the same wireless system it's best just to leave it in channel 1 and leave it alone. It will work well. While playing I moved around the house and it definitely has great range. It was fun moving into different parts of the house without worrying about getting tangled up in a long guitar cable.

Used this switch in an outdoor location. This PoE powered switch makes it so convenient to run just one ethernet cable for both power and data.

Not much to say about an ethernet cable, except that it works.

Short Ethernet cable that works.

Ethernet cable wet dream.

A Ethernet cable that works! And it was low cost.

Great for my JBL powered speakers great value! This compliments my 16-channel mixer????

This is a great switch for multiple uses. I have this expanding Ethernet ports on my desk, but I love that I have it powered by POE to save a plug - I couldn't find a switch for near this price point that supported POE to power the switch. It works great out of the box, but having the ability to customize with the Unifo controller is nice. Hard to match the value here.

This ethernet hub used along with a good powered USB 3.0 hub is a cheaper and is better solution than the $200 docking station that Microsoft sells for their Surface Pros. Half the price and with large hub you can get 10 USB ports instead of only the 2 ports that Microsoft is offering. It's worth it..

This switch is small, and the best feature is that it can be powered either by POE or USB C and I used the POE power. This switch quickly adopted into my Unifi system, and it just works. If you only have one ethernet port and you find you need more connections (like behind a TV) use this switch and powered via POE and plug in your TV, PS2 or PlayStation or other devices. I have two printers and only one ethernet drop at the location in my house, so I used the POE to power the switch and used 2 cables from the printers to the switch and it works great.