Dji Phantom Micro Usb Cable

Fits my DJI Phantom perfectly.

I use for DJI phantom 2. Excellent for carry all the equipment together.

I use the Nikon D850 with the DJI micro -USB Type-B cord so I can use the start/stop record button on the Ronin S. When plugging it into the Nikon from the Ronin S it plugs into the bottom half of the Nikons USB-3. It took me awhile to figure that out. Hope this helps.

Needed this for charging from a micro-USB cable. Works great for that.

I have 3 batteries for my DJI Phantom 4 and this is the easiest way to make sure they are all charged and ready.

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

Buy a longer cord like the USB 3.0 A/ML to MICRO B/ML CABLE - 3'

I have the new DJI Phantom 4 Pro+ and this charging hub works great.

I purchased this cable to connect my Sony A7iii to my DJI Ronin RS3 Pro Combo after the USB-C to USB-C connection from the gimbal to the camera was engaging PC remote & disabled SteadyShot on the camera. After numerous trials and tribulations, I took a gamble buying yet another cable... you know how that goes... Anyways, I'm happy to report if you are experiencing this issue, then this cable will be your fix! Happy Filming!

DJI R Multi-Camera Control Cable for RS 2 & RSC 2 (USB Type-C)