Dual Monitor Causing Obs Studio Flicker

This monitor is really good: bright, sharp, flicker-free, easy to set up & use. I bought it through a deal ($99.99) and now regretted because I should have bought 2 more at that price.

Very sharp image Vivid colours Eye protection: anti-flicker and blue light Intuitive menu, from its controls Software to manage the monitor (down from Done) Up to 75 hz 5 usb 3.0 ports that expand PC ports A foot that allows the monitor to be rotated in 90 degrees, rotate left and right, raise and lower and pivot it. And the other features that the monitor possesses. It is recommended to download the software for handling and monitor drivers from Acer so that the operating system recognizes it correctly. You can play games perfectly well, although it is not a gamming-oriented monitor. The only criticism is the sound quality of its speakers. I recommend it.

Great monitor, easy to adjust. Love the resolution, has a wide range of brightness which I use at about 45%. Flicker free when set above 60hz refresh rate. So far I have no complaints. I am using it along with my ASUS ProArt PA248 monitor

Easy to use and works great. Using this to stream from my GH4 to OBS Studio. Great, simple streaming solution.

Just works. Plugged it into USB3, and the HDMI attached camera simply works everywhere I want to use it, like OBS Studio, Zoom, etc...

First i was a little skeptical of the magewell hdmi adapter, but after a few months of use, it has performed quite well. It does get hot, so i unplug when not in use. The magewell worked well with the native streaming from Youtube and Facebook through the browsers and it also works well OBS studio. The Roland V-1HD is quite simple to use and our operators were able to get to speed with it pretty quickly. My only gripe with the switcher is that it is pretty intolerant of inputs that do not conform to the format it is expecting to receive. Once i found that out, i was able to correct that by ensuring all of my cameras were set to 1080 30P. That ended up forcing an upgrade on an older camera that wasnt able to output 1080 30P. The V-1HD was able to work with that cameras 540P or 1080I outputs, but it required a level of effort that our newer cameras didnt need. In end, we just upgraded the older camera. The V-1HD also has an audio mixer built, but i found the inputs seemed to auto adjust the signal levels despite having a manual adjustment on the side of the switcher. it could have been something within my set up as i had too use a xlr camera adapter to convert the 2 channel xlr input to 3.5MM stereo in order to connect to the Roland. While the audio was acceptable, i resolved this purchasing a Dante AVIO usb adapter and just routing sound independent of the switcher to OBS studio. i still use the native audio from the switcher as a back up feed in OBS.

Works well with my OBS Studio. If you are using Vmix, don't forget to set the video format of the input to MJPG

USE: We run a couple of these cameras in our small (100 ppl) church. The cameras are running via USB (~50ft cable runs) with a USB splitter, and our congregation has been very pleased with the quality of the image for live-streaming. We pre-program scenes for each camera in OBS studio and use our presentation software to trigger MIDI signals which translate to key presses in OBS studio to control which scene/camera is shown, making it extremely operator-friendly. We installed the first of these cameras in 2020 for live-streaming services during the COVID shutdowns and it has worked great for more than a year. Because the automatic settings on the camera are perfect for the sanctuary environment and the pre-programming of our system is already set up, it takes less than 30 minutes to add in an additional camera to expand the system. As the title of this review says, the cameras work so well that we bought another. And we may continue to add more in the future as our church keeps growing.

Plugged it in and it works for OBS Studio streaming, no drivers needed. More importantly, it is working to give a quality 1080p image from a Nikon DSLR through a 50 foot HDMI cable. (A different HDMI capture device would not give a signal for this same combination.) 50 feet is pushing the limits for HDMI, so I'm happy not to need an HDMI extender.

I am using these microphones with OBS Studio software to produce YouTube videos. The setup of the microphones was very intuitive and easy and the OBS software recognized them immediately. The sound quality is quite good and exceeds that of my pair of $800 matched corded microphones.