Ethernet Adapter Self Assigned Ip

This switch makes it easy to add Ethernet ports to your home network, you just need to run an Ethernet cable from your router to the switch, then reboot your system to make sure the IP addresses are assigned and you can still “see” all of your devices. I had a NAS drive that was assigned a new IP address after the install, and rebooting the pc helped fix the access issue. I was able connect another pc as well as another device to my network very quickly, all connected at 1GB/s.

I have a wifi only laptop that I wanted to use to test a newly purchased IP camera on. The adapter allowed me to connect a ethernet cable to my IP camera for testing. After giving the adapter a IP address in the same range as the camera my system connect with the camera perfectly. I would highly recommend this adapter for anyone needing to add ethernet wired access to there wifi laptop.

Very easy install. Self registers on Comcast. Pass through IP to router. Increased download over 25% compared to Comcast X1 modem.

Not much to say, it's a USB to Ethernet adapter. Works exactly like you would want it to.

In the past 15 years I have used various brands and models of video surveillance cameras for our home and Japanese garden. I have sought to buy high-quality products equipped with PTZ and Power-over-Ethernet that were provided with user-friendly documentation. When it came time to replace several older cameras I discovered this Lorex model at B&H and purchased one. Features that first delighted me: (1) It came equipped for either surface (ceiling) or wall mount (and with all the hardware necessary); (2) among its features was ONVIF capability (connect it to your router or switch and it adopts an IP address granting access consistent with your network); (3) use a browser to go to that assigned IP address and a Lorex control panel opens in which you can assign a fixed IP address (good practice for 24/7 camera use); (4) superb industrial design (example: installation last step is attaching the dome under the camera from below, but delightfully the screws for that are lossless--designed into the dome mechanism so they won't fall out; (5) carefully prepared documentation that, while it requires carefully reading, leaves nothing to chance; (6) even the tools you need are included as is a 100-foot length of Ethernet cable; (7) the camera's images are clear, crisp, and nicely color balanced; (8) low light levels are quite good (but it does not provide IR light for total darkness, some ambient light is necessary). So, after that experience with my first purchase, I have since purchased two more. Two cameras are installed and the third is on its way to me from B&H. (By the way, early on I asked a question of Lorex tech support and they were back to me in a day!) This is the camera I have long hoped to find. And the price is right! Thank you Lorex and B&H.

Both ethernet and wifi have been great. I finally was able to setup port forwarding and static ip rules with no issues. Also love the traffic analyzer in the GUI.

Self portrait must have!

[This review was collected as part of a promotion.] The Belkin USB-C to Ethernet + Charging adapter is amazing tool to have with you when you need an ethernet connection. The USB-C to Ethernet + Charging adapter charges your connected device while also providing an ethernet connection, so no need for multiple connectors. I have been using this on my Android phone and my laptop, both devices have a USB-C port and my Belkin adapter worked great on both devices. It provided an adequate charge and a stable internet connection without any issues. The adapter was immediately recognized by both devices and there was no need to install any software to make the adapter work. The adapter is also small and portable enough to carry with you anywhere you go. I would highly recommend this adapter to anyone looking for an ethernet + charging adapter.

works great, does not heat up as much as other ethernet adapter I've had.

Used it with apple TB to ethernet adapter