Ethernet Lan Port Splitter

This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

I use this with a 20gbps ethernet SFP+ backbone uplink from the UniFi SFP+ Aggregation Switch. My LAN has never been faster!

A reliable solution for users of laptops without an Ethernet port.

I bought a this modem and a matching nighthawk ethernet splitter. Now both my wireless internet and ethernet ports are lightning fast.

Long cord, plenty of connections, has ethernet, phone with splitter and coaxial. Best protection for the money.

Great Canon Battery Grip this time with Ethernet port.

I always take my multiport adapter with me whenever I'm traveling. Super handy especially the ethernet port.

Easy activation with Comcast. I was surprise to learn I could not use the extra LAN connections in back since I have to have a port aggregation in my router.

I had some early issues with the LAN port, but Gigabyte's support via email helped by recommending clearing the CMOS. It's been a great motherboard with so many great features, lots of internal and external USB ports, two PCIe 5.0 SSD slots and two PCIe 4.0 SSD slots, room for 128GB of RAM, plenty of SATA ports, 2.5Gb Intel LAN and WiFi 7.

Plugged it into the the LAN (towards the router) and the other port towards the Ubiquiti bridge (ports are clearly marked) and it worked perfectly. I did add ESD protection with a driven ground between the bridge and this device, but am pretty sure this device stated it also provides that protection. I bought a spare to be safe, but suspect it will not be needed as build quality appears excellent. Thanks for selling a quality product!