Front Loader Washer Door Prop

Received today, I wont get to deep in the unboxing as its very easy and the paperwork is child proof. It all fit together and even shows you where on the cartridge to put your finger pressure when replacing the ink for best results. A few things to think about. First I used ultra smooth fine art paper from Epson, it will feed through the top loader sometimes, though much more consistent in the front loader. BUT...It must be Very straight, use the lines on the entrance tabs and make sure the are lined up Perfectly on each side or you will repeat until its perfect, and this is done by hand, the feeder will not straighten it for you if you start it even a little bit off line. I was able to print out all the pictures you see on the rack (13 )with the starter inks, I ran out of light grey first then light vivid magenta. I got 4 prints after the light black low prompt came on the little screen on the printer, the computer will tell you well before that. A bit to much play in some of the plastic covers, and the feed tray cover on the front feed Must be closed each time after you feed it before you print. It will load but will not print until closed but there is a prompt to do so. Maintenance box is about 15 percent full after all these prints and setup, so with an extra box included you have plenty of time, most came form initial setup of inks. I actually think its faster than the average review says, but I have never been a production printer and I usually do not print border-less, I mat my most of work and its just covering up Very expensive inks. The little screen is very well thought out, bright, clear and menu items easy to find, its a touch screen that swivels up but Its tight enough and does not move when you use it. I will edit this if I find anything that may be of use. I am glad to have it,.... and as ALWAYS.... very pleased with the way B&H provides the best shopping experience available online or in store....

I like the size of this insert. It fits nicely into all my front loader backpacks, so I'm not limited to a "photo backpack ". Also it is just right for my z7, 15-30, 24-70 and 70-200 all f/4. Plus batteries and a few filters.

I purchased the Back Loader but I did not like zipping it up and flipping it over to access the front panel. The Font Loader works. For Travel with 2 camera bodies, lenses, drone, mics and accessories the Pro Light Front Loader is great.

I love this thing. I have found so many uses for it. I take out the studio trash with it, I used it as a prop in a photo shoot, and I use it to take the packages dropped off out front, there are many because all the wedding albums and prints get delivered, to the back where our work area is.

Easy to install and works great. Love being able to see my front door from wherever I am.

It so convenient to see whose at the front door and this product works great

Excellent paper for my purpose (collage), and rapidly delivered to my front door.

Someone please tell me any other film washer better than this.

Just what I needed to use my top loader with my action x.

[This review was collected as part of a promotion.] Let’s start with the packaging.. it very nicely packaged and everything is well protected. Once out of the box, installing it was a breeze. So simple! Zero issues mounting it to the front door and it seamlessly connected to our Google Home system once it was set up on the Eufy app. The main person who sets up the security lock is the “owner” and is able to share admin access to other people (if desired). We have 5 kids (who don’t have admin access) they each have their own passcode linked to their names so we know who unlocks/ locks the door and a record is kept on the app. We can seamlessly ask “hey Google, lock the front door” and within 3 seconds it’s locked. You can also lock/ unlock the door on the app, manually from inside or holding the check mark button for 5 seconds on the outside keypad. We previously had a Nest security lock but Nest and Googled merged companies and the door lock system never fully worked after the companies merged. That brings me to the very minimal dislikes.. I don’t like that you have to hold the confirm button for so long (5 seconds) before the door locks with the outside keypad. It would be great if it was a simple button press like the Nest did. Also there is no Privacy Mode that disables all passcodes like the Nest did. I would have to go through and disable passcodes one by one which is a pain when wanting privacy and making sure there are no unexpected visitors. Overall this is a solid security lock and will now be my recommendation to anyone in the market for one.