Front Loader Washer With Bad Pressure Switch

Received today, I wont get to deep in the unboxing as its very easy and the paperwork is child proof. It all fit together and even shows you where on the cartridge to put your finger pressure when replacing the ink for best results. A few things to think about. First I used ultra smooth fine art paper from Epson, it will feed through the top loader sometimes, though much more consistent in the front loader. BUT...It must be Very straight, use the lines on the entrance tabs and make sure the are lined up Perfectly on each side or you will repeat until its perfect, and this is done by hand, the feeder will not straighten it for you if you start it even a little bit off line. I was able to print out all the pictures you see on the rack (13 )with the starter inks, I ran out of light grey first then light vivid magenta. I got 4 prints after the light black low prompt came on the little screen on the printer, the computer will tell you well before that. A bit to much play in some of the plastic covers, and the feed tray cover on the front feed Must be closed each time after you feed it before you print. It will load but will not print until closed but there is a prompt to do so. Maintenance box is about 15 percent full after all these prints and setup, so with an extra box included you have plenty of time, most came form initial setup of inks. I actually think its faster than the average review says, but I have never been a production printer and I usually do not print border-less, I mat my most of work and its just covering up Very expensive inks. The little screen is very well thought out, bright, clear and menu items easy to find, its a touch screen that swivels up but Its tight enough and does not move when you use it. I will edit this if I find anything that may be of use. I am glad to have it,.... and as ALWAYS.... very pleased with the way B&H provides the best shopping experience available online or in store....

I like the size of this insert. It fits nicely into all my front loader backpacks, so I'm not limited to a "photo backpack ". Also it is just right for my z7, 15-30, 24-70 and 70-200 all f/4. Plus batteries and a few filters.

I purchased the Back Loader but I did not like zipping it up and flipping it over to access the front panel. The Font Loader works. For Travel with 2 camera bodies, lenses, drone, mics and accessories the Pro Light Front Loader is great.

These were the best things I found to organize my wire from my light to my pressure switch, would highly recommend these.

The remote pressure switch works very well and looks great! B&H is great to work with and delivered promptly.

With just the medium sized nozzle gives great airflow/pressure. Only bad part is mostly how noisy it is; don't use it during quiet times. Weirdly, the duster comes with a spring peg for attatchments, but the nozzles do not come with a matching hole.

I purchased this because of back problems. It totally takes all the pressure off my back and transfers weight to hips. I recommend this for anyone who has a bad back or just wants to have camera where it's out of the way and leaves hands completely free.

Works very well. The variable pressure zoom is perfect, and it has a switch for s - Sony and p - Panasonic, which are the 2 video cameras I have, and the switch works as expected. The record button works fine, but you do need to push it for a millisecond. If you hit it for a short time, it may not start recording. This may be the camera though, just something to be aware of. Overall, really great for simple remote zoom and great cost.

When you switch lenses under pressure, you don't want to waste time trying to also switch the filters from the old lens to the new one. This is even more important if you drop the filter, smudge the filter, sneeze on the filter, etc, etc. You can save a lot of grief by investing in enough of the Tiffen 812 filters to avoid this possible mini-disaster. I bought a couple of these filters when I was choosing the lenses I would use for a wedding shoot. It was wise to choose the industry standard in a warming filter. The Tiffen 812 is amazing in flattering flesh tones.

They are used on Sony DSR PD170 camcorders. The switch is pressure sensitive which allows you to manually control the zoom. I really cant say anything negative. They are exactly what we needed for a reasonable price.