Full Band Out Of One Instrument

Wow, this works really well. I bought it for the band at our church. Makes it very easy for someone who plays an instrument and sings to have a decent in-ear monitor without spending a fortune. Very solid all-metal construction. Setup and use are very simple; the diagrams & labels silk-screened onto the top make it easy to see what should plug in where. As a nice additional touch, it doubles as a direct box for the instrument input. I highly recommend the optional MSC106 mic stand adapter if you're using this on stage. Only drawback is that you need a long cable or an extension for your ear monitor / headphones. If you mount this on a mic or music stand, you don't have a lot of room to move. We'll be buying a mix of these and the 1-channel PM50s to move our whole band to in-ear monitors.

We use a snake combining vocal mic, instrument mics, D.I.s, and monitor cables for each band member, running to their area of the stage from the stage digital mixer, and this product makes it easy to customize those changes and change out cables when necessary.

If anyone in your band wants more me control of their in-ear foldback for both their vocals and an instrument (or two instruments), then this is THE box for them! Ok so it costs more than the 2 channel competition, but this has the essential 3rd channel the others lack, plus an integral stereo DI box, so the total cost is much the same. What is really nice is the way it can be set for mono or stereo inputs on both the instrument channel and the main foldback. The cct diagram even contains instructions to convert the mic channel for line level inputs. A really useful box, and a much better buy in real terms than the competing products, for use by real musicians!

I'm using this controller with the full version of Bitwig. Bitwig and Impact LX25+ feel like an instrument instead of a DAW and midi controller. One thing I don't like about theImpact LX25+ is Soft Take Over mode which is the knob has to be turned passed the value that is Bitwig in order to take effect. This is to avoid value jumping. I'd rather have immediate change even if jumping occurs. The first Impact LX25+ I received from B+H was defective, but returning it was easy and the one I have now is solid.

This is a relatively new product for use in weekend services, but it has worked well.  The instrument sounds clear and full. When I first tested the system I played for 30 minutes before I put the guitar down...it really was nice to hear the Martin through FOH via the QLXD14.  I prefer it to other Sennheiser products Ive previously used and other Shure products from the GLX wireless family.  Its worth it to spend a little more to get the quality of sound.

From Whisper to Full Out Boom, this is the portable for me. Separation at all ranges and Clarity with authentic Bass throughout.

This product is made very well full of different pockets for all your photo as asseries when you go Out shooting .This vest was a sale for me and any other photographer

I purchased this because the reviews on a similar unit from Ubiquiti were not so great. I mounted this on my roof (vent pipe) fed by some outdoor Cat5e, and it covers my 5 acre property with no issues, -72dBm on 2.4 GHz. band out at 500 ft. maxing out at 65 mb/s.(20MHz. wide channel). It's full speed on 5 GHz. within 350ft., dropping to 96 Mb/s. at 450 ft. It's a top speed performer for a 2x2 Mimo unit. I have one antenna horizontally polarized and one vertically polarized (using white electrical tape at the antenna base to keep them from turning in the wind), for some diversity and less sensitive to phone position placement. It was 100deg.F. here the other day and no issues with the unit at full power all day. It's signal penetrates into the house and into the basement with no issues at all. I like the fact that is has two independent 2.4 and 5GHz. radios and each are able to have their own set of multiple SSID's. You can put your guest network on either band and IP isolate an SSID for security purposes if not running VLANS. It also has guest webpage authentication options including through Facebook. Note: With my iPhone I had issues with the AP on 2.4 CH. 11 (clear channel too) but not an Android, so I parked it on CH. 1. I primarily use the 5 GHz. band anyway as the speed and distance on this unit are really good. TP Link did a great job with this, best deal out there. Upgrade to the latest firmware as soon as you get it.

Our high school room is small, but high schoolers love a full band. Without the drumshields and lid, it's too loud for even high school kids. The lid made a huge difference by keeping sound from bouncing off the ceiling and back off the floor.

Just installed my new projector. I went with the same band name 5 years earlier. The new one blows my old one away. I can use it with full room lighting. Great colors and clarity. I can't wait to use it again! Thanks