Home Network Wireless Router

Fast Router. Feels like a quality made product, more like an industrial or enterprise product feel. I have my SB8200 cable modem on eth0, home office on eth1, and Linksys mesh network on eth2. It took me about 30 mins to setup being new to this type of router. Used basic wizard to setup. Made sure NAT was enabled. Firewall is enabled. I had to reset cable modem to get things going. I used various videos on you tube for setup help. Router CPU and RAM barely get used during testing of several 4K Video Streams, ip phone calls, file transfers, and speed tests running at the same time. My COX gigablast connection runs at full speed most of the time. I still need to do some real throughput testing, machine to machine on local network. I use Airflow and VLC to cast 4K content from home office to my living room entertainment center. I definitely noticed a time difference. It simply takes less time for actions to engage and finish. I can tell it has a better brain. Time will tell with reliability but I suspect it will be my router for a long time. So far, I'm happy with its performance.

Excellent router that covers my whole home and all my wireless products.

Wanted a basic router to upgrade my wireless network..Simple to set up and works great..

Synology makes setting up this mesh router fairly simple. Power it on next to your router, use the DS router app and you're up and running in about 15 minutes. I have four of them and they are all wired. So make sure you follow the instructions and connect it wirelessly to the router first, then take it where you want on the network and plug it in. The ability to add a dozen of the MR2200's to my router means that I can create a reliable and fast wireless network that rivals my wired network in terms of square footage and then go beyond the building. My wireless devices automatically drop and connect as I move around. I could not be happier with this device because it is reliable and the range meets all my needs. I have no complaints from my network users.

Upgraded from 802.11ac router and wireless network was dramatically improved - both speed and reliability. Gigabit FiOS was previously bottle necked by old router but now getting much closer to advertised numbers. No longer having issues with mult computers accessing VPNs and/or simultaneous Zoom calls. Set-up took a few tries but now very reliable. Very happy with upgrade.

Speeds on the network seem fantastic after dumping my cable provider router! Both wireless and wired!

Needed to replace a wireless router with this router. Love the smaller footprint as it adds room in my network box.

This router works well with other Ubiquity Unifi devices including managed switches, wireless access points and network extenders. This router is fast. The self hosted server app works well on a Windows 10 pc. What isn't clear from the product description or BHP tech support is that the 2.5 GB ports adapt to 1 GB connections and that this router can replace an older Ubiquity UniFi router by plug and play. All that is needed, is to replace the new router on the gateway connection and adopt the device. Once you adopt the new router you get a message saying you can't have 2 gateways. Then just go and forget/remove the old gateway router from the app and re-adopt the new gateway router. Give it a bit of time and all the settings will be automatically applied to the new router. I have a xfinity cable modem, UniFi gateway router, 2 UniFi 8 port managed switched, 1 UniFi WAP, 2 UniFi Beacon wireless network extenders and about 50 network devices managed with a fixed ip setup. My only complaint is that nobody at BHP or Ubiquity could give me a straight answer on upgrading the router.

I bought this AP and a related router to replace an aging consumer grade wireless router which I had. Setting up this AP was a breeze and I'd recommend this to anyone wishing to implement or extend a wireless network in their home or small office. The thing to keep in mind is that this is intended to be mounted on a wall or preferably a ceiling. The router only requires a network cable and you use the included power injector to power the unit. This AP will require some other device to route the traffic from your web provider. Configuration is easy with the Unify controller software installed on your pc. Wait for the AP to power on, load the software on your pc (on the same wired network), and let it look for and provision the AP. You can configure a single combined SSID for 2.4 and 5ghz or separate and configure a guest network if so desired. Once configured, the AP has been running without issue solidly for a few weeks now. I have my PoE injector in my office and plugged into my UPS along with my modem, router, and switch. If the power goes out, all of the wireless and internet access will stay up. Be sure to test all your ethernet cables prior to installing everything. I had multiple issues with the cables I was going to use initially. One cable would only allow a max 100 connection, the other would allow gigabit, but the rj45 connector was able to pull back just enough while connected to cause an intermittent connection. Swapping to higher quality cables solved these issues. I have a 3800 sq ft house in an L shape. This AP is on the second floor in the center of the house. This works well for coverage everywhere and I've even seen coverage in areas where I had little to none previously. I've got it mounted in the ceiling of a hallway next to a smoke detector. It doesn't look too out of place except for the blue glow (which can be turned off). I'd recommend this to anyone that has basic networking and computer knowledge looking for a solid access point.

We use this product to hold up the household network router and the wireless security system. With the recent earthquakes in California that could be felt in Las Vegas, we were glad to have the ability to know that our security system would be working even if the utility power was interrupted. This is a great product that is produced by a great company.