Homemade Pvc Pipe Musical Instrument

It is a good small compact dolly and works well on tracks or PVC pipe.

I made a DIY PVC pipe frame to go with this and it really works great for outdoor portrait sessions.

I started out using pvc pipe but they bowed under the weight. Bought these to replace the pvc pipes and no more bends.

The fill light from this reflector has upped my game when it comes to headshots. I tried making one from PVC pipe, and it 'worked', but not like this. Much easier than holding a reflector by hand under the subject!

I have two of these units outside, weather protected of course, and they have worked flawlessly for us. The distances are about 250 feet on each side of unit, letting us reach 500 feet total. Some reviewers claim not able to reach over 275 feet or so on both sides with one of these devices, but sorry to say I can't confirm that. Here's a tip: Use short length of PVC pipe from hardware store to weatherproof the unit. Use 1.25 or 1.5 inch pipe (don't remember which it was) and the unit fits right in. Use PVC threaded caps to seal both sides of pipe (I use threaded in case I have to access device). Drill small hole on each cap and thread the CAT5 cable through, put on the clips, insert them into device, put a squirt of all-weather caulk on drill holes to seal it up.

I bought this with the Glide Gear SYL 960 and together they work great (see my review on the Glide Gear 960). What I like best about this system is price, the convenience of a carry bag and ease of setup. I hated lugging my other dolly tracks to set since I used either white , ten foot, PVC tubing or ten foot steel pipe at one of those home improvement stores and I could never fit it properly in my truck since it always hung dangerously out the back. The Glide Gear track is well made and even comes with eight (8) rubber pads to stabilize the 12' track on flat floors. I love its total convenience and now no longer dread throwing loose PVC or steel pipe into my grip truck before a shoot.

These headphones are great for tracking drums or any musical instrument! Love them!

I used to work in musical instrument & pro audio retail and I hate to pay retail for cables, but I also realize the value of having good cables where data and audio transfer are critical. I bought these cables for all of my camera tethering and for data communication with one of my synthesizers to communicate with my computers. Im very pleased with the construction and performance & I also like the bright orange so these cables stand out from my other data cables.

A well made musical instrument cable for light duty use at a very reasonable price point. Cable is very supple and well made from both a mechanical and electrical perspective. Wire and braid are soldered to the connector, not crimped, I like that. Shielding from electrical noise and interference (radiated susceptibility) seems adequate for my use. Cable microphonics do not seem to be a problem with this musical instrument cable.

This is a great case. I've had good experiences with SKB in the past for musical instrument cases, and this is no different. I have 2 Sony a7iii camera bodies and an assortment of lenses in here, and it all fits nicely. The lid organizer is a nice addition too.