Hot Pressure Washer Chemicals For Cleaning Oil

This solution in combination with their green FX sensor swabs really did the trick. I know they sell a sensor cleaning solution, but a lot of times those don't get oil spots off of the sensor and this one gets dust and oil off to a streak free shine. I highly recommend using a bright light or a sensor loop that is lighted to see into the sensor area to get all of the dust. Also, blow your sensor off on all areas with a hand squeezed blower, not a compressed air can. Once the sensor is free of loose debris, apply 3-4 drops of this solution to your green Visible Dust sensor swab and make one pass from right to left or left to right, NOT BOTH! When I tried swiping right to left and then back again I actually left dust on the edge of the sensor. Use this product twice and then check again once it's dry for any more dust and simply blow it off. This product does not leave streak marks and works perfectly. I can't say enough good things about it. I own two D700's and I wouldn't use anything else on them. Sending your camera back for cleaning every month can be time consuming and unpractical and dry cleaning alone often times isn't enough to get the stubborn dust off the sensor. Buy it, don't look back!

this is my go to product for cleaning print emulsions to get rid of marks especially ink marks and nasty oil grease, it dries intantly when i used it. I highly recommended to all

Seems to be a comon issue with Nikons that oil from the shutter makes it's way to the sensor, I used the cleaning swabs and edge cleaning swabs. Watched thier video on youtube. In 10 minutes I was done and my image was back to crystal clear again. No repair facility, no hassels! Do Not Fear the sensor it has a protective filter over it; and that is where the dust and oil collects! Note my camera has a mirror up for cleaning fuction! I am even going to demenstrate it's use in class!

As long as the can is held vertically there is no unnecessary wetting from the chemicals. o when cleaning off negatives to scan or for cleaning dust from the bulb of the scanner this is excellent.

Fast shipping, good tracking. The chemicals arrived in good shape and after following the instructions exactly (used a hot water bath without any suis vide) developed film almost perfectly. Extremely happy with the way it turned out and will be buying again!

My Sony a7R II had some particles on the sensor that could not be removed by puffs from a Rocket blower. I had a photo shoot scheduled a week away so I ordered the type 3 sensor cleaning kit from B&H. Like everyone else, I was concerned about cleaning the sensor myself on a camera with built-in stabilization. I watched the videos on line then went for it. I gave the sensor a few more puffs of air, put the camera in sensor cleaning mode and let it shake the camera, left it on after previously having set the go to sleep time up to the max setting, put three drops on each side of a swab and put the proper amount of pressure to slightly bend the swab. One pass to the right, relax the pressure and one pass back to the left with the same pressure and its done. The sensor was spotless and several test shots confirmed the successful cleaning. You may want to send your stabilized camera body to the manufacturer for cleaning but I didn't have the time and my gamble paid off.

First attempt at cleaning a sensor. Correct pressure and a slow is smooth, smooth is fast mindset is needed. Took three swabs to completely clean, but ~$10 (Only because I used three swabs) for a cleaning instead of $60 (Having a "Professional" do it) is a winner. Plus, company backs their product if your camera is damaged regardless ( whether swab did the damage or user error).

OIL the ring so you can get it off ..!

Someone please tell me any other film washer better than this.

like a oil damper. it is never get out of position.