Hp Laptop Windows 8.1 Wifi Drivers

Got it very recently for my Windows 8.1 laptop and have only been using it for a few days. Overall my experience has been pretty good. The port on the IR sensor is a mini USB B and there is a slight overhang with the supplied cable since I connect the sensor to a USB on the same side as my laptop. The driver that it came with cannot calibrate this pen at all; I just used the built-in calibration tool. You need to reset the calibration if you want to re-calibrate. The pen is plug-and-play, but you may need to reload any existing browsers to get it working right. I prefer a pretty high resolution, so using the trackpad or trackpoint to move the pointer can be pretty time consuming compared to tapping with the pen. It's also very useful if you don't have enough room to properly use a mouse. Swiping left/right to go back/forward in a web browser is also pretty useful.

Good great with my m2 mbp and also windows laptop too, no need to install drivers.

I love this motherboard, it's got amazing features and was pretty simple to set up. The biggest downside is that for Windows 10/11 to be able to install the drivers for the wifi card to work, you need an internet connection. But you can't get an internet connection over wifi since Windows can't use the wifi card by default. Maybe this isn't a problem if you have a working windows installation with the latest updates but I was doing a complete clean install from the official Windows 11 USB Drive and I needed to plug the computer into ethernet to be able to set up the wifi. This was pretty inconvenient as my router was on a different floor of my house... Also the audio drivers that are by default installed comes with some bloatware software that is really difficult to fully remove. It also has some way to automatically restart itself and stay in your system tray (as a shortcut to re-download the software suite) even if you uninstall it and remove it from startup applications. This type of behavior from software rubs me the wrong way and really makes me reconsider buying ASUS motherboards in the future if this type of software is necessary to use them. This all being said, once I got everything set up and installed, it's worked flawlessly for me.

I use windows 8.1 quite often. On this mac, all drives (except the internal flash drive) are external. Windows runs great off Thunderbolt connected drives. You can have multiple window drives and select the one you want on boot by holding down the option key.

Using an Asus ux501vw laptop, Windows 10, latest drivers and firmware. Works great! Write speed (Raid 0) 350MB/sec. Moved 1TB without any problems.

Works great with no issues on my new HP laptop running windows 11.

This is an internal drive, plain and simple. Starts up fast, extra thin (half the thickness of a normal 3.5 drive), runs cool (thinness allows for more heat dissapation). But... I had bought this to put in an external USB 3.0 enclosure to use with my Dell XPS 8700 which has Windows 8.1. Unfortunately, after hooking it up, it would perpetually disconnect itself during file transfers, especially with files upwards of 1gb. Thinking the drive was defective, I took the internal drive of my Dell, which was the same brand, model and capacity, and put that into the enclosure. Same disconnects occurred. Then I replaced the cable between the drive and computer with a USB 2.0 cable, and the disconnects stopped, although file transfers took 10x longer. This proved that the drives were fine, but they did not work in a USB 3.0 enclosure. I could live with that, until... After a week or so, my computer developed the same symptoms (constant disconnects) for other USB storage devices. Since it was USB 3.0, I blamed the USB 3.0 drivers which Windows 8.1 seems to have implemented so poorly. BUT THEN I STARTED GETTING READ ERRORS ON MY SYTEM DRIVE. I could not back up files without drives disconnecting every few seconds. In short, THIS HAD SCREWED UP MY OPERATING SYSTEM. After a complete reinstall of Windows, everything was back to normal and all my drives (except the Barracuda in external enclosure) could read and write properly. The next day I bought a WD Black and put that in the enclosure... BOOM ... 100gb of files transferred seamlessly. So, to summarize... DO NOT PUT THIS DRIVE IN A USB 3.0 ENCLOSURE OR IT WILL WRECK THE WINDOWS 8.1 OPERATING SYSTEM. 1 month of my life wasted, I can't return the drive since it isn't actually defective, thought I'd at least write about my experience.

This printer works great with windows 11 and windows 10. I needed a new printer, my old HP was not windows 11 comparable. The new HP printers required an HP online account for local printing, which I do like. So gave this Canon a try and it is great! I have it on a network with both Windows 10 and 11 computers with no issues. Setup was easy and it installed in minutes. I have it connected to the network WiFi router via a Ethernet cable and use a fixed IPV4 IP. (disabled DHCP). Now anyone connected to my WiFi can easily print!

The HP computer I purchased didn't have WiFi capability, so I purchased this AC1200. Wow! It is very fast. With Windows, I just plugged it in and it started working. Very happy with this devise.

...After downloading the drivers needed to run it with Windows 7.....