If Config All Ethernet Adapter Lan Represent

Keep in mind that this base config iMac has no ethernet and only 2 USB-C ports. Of course with the proper USB-C adapter / hub / dock, this is a non-issue. But you should be prepared for this need.

This router is easy to config interface, toms of options in WAN and LAN configurations. Best price performance, recomended.

2/3 of a stop is a good value for my needs. the full stop was too much and 1/3 not enough at all.

This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

I use this with a 20gbps ethernet SFP+ backbone uplink from the UniFi SFP+ Aggregation Switch. My LAN has never been faster!

Not much to say, it's a USB to Ethernet adapter. Works exactly like you would want it to.

[This review was collected as part of a promotion.] The Belkin USB-C to Ethernet + Charging adapter is amazing tool to have with you when you need an ethernet connection. The USB-C to Ethernet + Charging adapter charges your connected device while also providing an ethernet connection, so no need for multiple connectors. I have been using this on my Android phone and my laptop, both devices have a USB-C port and my Belkin adapter worked great on both devices. It provided an adequate charge and a stable internet connection without any issues. The adapter was immediately recognized by both devices and there was no need to install any software to make the adapter work. The adapter is also small and portable enough to carry with you anywhere you go. I would highly recommend this adapter to anyone looking for an ethernet + charging adapter.

works great, does not heat up as much as other ethernet adapter I've had.

Used it with apple TB to ethernet adapter

I was a bit worried because we have such old wireless equipment on our LAN, but the adapter installed and worked with no problems.