Installing Windows 7 On Usb Flash Drive

The drive was easy to install. You might need a mounting bracket if installing into a larger box. Installed Windows 10 on it and the workflow and productivity is flawless, fast and reliable.

Installed the drive with no issues. Went through the process of partitioning it and installing windows 11 without any issues too. So far the drive is working fine in the computer

I use windows 8.1 quite often. On this mac, all drives (except the internal flash drive) are external. Windows runs great off Thunderbolt connected drives. You can have multiple window drives and select the one you want on boot by holding down the option key.

Windows 11 pro in the USB drive very practical

Update can be done without old CPU with USB flash drive only.

We are using a flash drive to store and playback videos on a portable projector. I tried with a USB 3.0 Flash Drive, thinking the newer version was better. But the projector had a different idea. I learned from the professionals at B+H that this unit requires an older USB 2.0 Flash Drive. I never would have thought of that but sure enough, when I used this Verbatim 64G Ergo USB 2.0, the projector recognized the videos and played them flawlessly.

22TB SanDisk Pro G-Drive drive review I'm using this drive in a large photo and film Archive. I purchase a sample drive to test out before committing to more drives. The reformat to Windows is a pain. Luckily, I found a YT video that walked me through it. After reformatting the drive to Windows, the 22TB shrunk to 20TB. That is disappointing. It is not that noisy, just a few clicks once in a while. It is decently fast and really kinda quiet. I am using a USB3.0 port with Oyen adapter cable to go from USB C to USB A. SanDisk only gives you a USB C cable. Time will tell how they hold up, but if they do hold up, I plan to buy a few more.

Easy to use and durable USB flash drive

Material feels good to touch and of good quality. Installing the drive is very easy. The standard USB jack doesn't disconnect as easily as some more compact types. The LED is convenient

I have this connected by USB 3.0 to a Asustor AS5304T 4-bay NAS. Setting it up was easy after the supplied USB cable broke as soon as I went to use it. First test was installing 1tb WD hhd's, works fine. Then I decided to see if I could figure out a way to install 2.5 ssd's. I found on Thingiverse a 3D model of a drive adapter that I could print and use. Made that and put a Crucial MX500 1tb ssd on it. This was able to be inserted into a bay and recognized. That works. BTW - These drive so far were NTFS. Here is where it I had an issue. I tried installing a 2.5 Seagate 5tb hhd formatted with a NTFS volume. This did not work. The Sabrent station changed it to show up as a GPT protective partition. I next installed A WD 4tb hhd and got the same results. After googling this problem I found that someone had contacted Sabrent about it and the suggested to do a low level format. I know that doing this would tie up a drive for ages before completion. Here is what I did: 1. In Windows I used Diskpart and performed a Clean. Then used Disk Management, initialized the disk and did a simple exFat volume. This worked on the drives I wanted to use that were over 1tb. Why? I did more reading and from what I understand is that it has to do with the disk sector sizes. This I don't need to understand for I only care about getting to a usable enclosure with larger drives. I have even read elsewhere that some people got so frustrated that they put it aside to collect dust. I hope this helps them. Overall, I am please with this product except for that junky USB cable.