Intel Ethernet Adapter Driver Windows 7

The Intel NUCs hit in (almost) every way for a mini PC. If you can use a small but powerful machine, definitely consider one of these. Here at B&H I got the barebones i3 kit (without the drive or any memory) and installed MS Windows, memory, and the drive myself. Two tips for self-installers based on the other reviews: 1) Pressing the power button for three but *not* four seconds takes you to a menu allowing you to set options like boot order, make sure LAN is turned on, etc. 2) If installing Windows 11, you might only need to download the wireless driver to a USB and run the driver installer from there after Windows install to get connectivity. Afterwards, Windows Update will help you take care of the rest of the drivers, BIOS updates, etc.

I was looking for USB to serial adapter which will work under the Windows 7 and this adapter does exactly that. Even better - Windows 7 already has built-in driver for this adapter!

It works, however the driver on ASUS' website were causing my input devices to stutter and the adapter didn't seem to work that great either, downloading the drivers straight from Intel (Intel® Wi-Fi 6 AX200) solved all issues. Another thing to note, is the Bluetooth capabilities require a spare USB2.0 header on the motherboard, to where a cable from the card connects to. It was never mentioned anywhere, but aside from that, it works.

This RealTek GB NIC works great in our older DELL PowerEdge 2850 server!! We needed to replace an Intel Pro/1000 MT GB server adapter that went bad and bought another Intel GB adapter but the server would/could NOT recognize the new Intel NIC. Tried everything to remove the installed Intel NIC driver so it would take the new Intel NIC but the Intel NIC just would not be recognized - driver would not install correctly. The SOLUTION was to install the RealTek GB NIC card (non-Intel NIC). The RealTek NIC was recognized by the server upon bootup. I updated the RealTek driver that was installed by Windows Server 2003 using the CD that came with the NIC card. It worked with no problem. Am going to team two of them in the server later. Note: Make sure you update any driver installed automatically by your computer, itself, with the CD driver.

Among several NUC's at home, I replaced a 5th gen NUC with this 13th gen model. It serves as a media center for my music and photo collection, hence the 1 TB SSD and 16 GB memory. For those unfamiliar with the Intel NUC product line, they are small (4x4), very quiet, well-engineered and supported by a three-year warranty. Over the years, I have installed dozens for customers and not a single one has failed so far. The performance is impressive. The clip that keeps the power cord from inadvertently being yanked out is a fairly recent and useful addition. Intel has excellent documentation (assembly instructions, product specs) that I recommend. During installation of Windows 11, neither the wired Ethernet nor the Wi-Fi adapter were recognized which required an Ethernet-to-USB adapter. Others may add the network drivers during installation. Installing the Intel Driver & Support Assistant gets the optimal BIOS, firmware and drivers in place. Now that Intel has sold the NUC line to Asus, I hope that they will continue the development and support of this great product.

This adapter works well with Linux, but will require the user to compile the open source driver and install it. Careful instructions are on the web. I use it on a workstation normally attached to ethernet, but occasionally in need of wireless access. Quick speed test on a strong signal was about 250Mbps (650Mbps on ethernet).

No knock on the product, but I had hoped it would connect my USB -B ported laser printer to the USB-C port on my notebook. It's an older printer and the port is USB 2.0 standard. The description for this cable said USB 2.0 so I hoped Windows would recognize the printer. The printer manufacturer (very well known Brand) does not provide a driver for Windows 10, but their Website says Windows 10 comes with a driver for it. This printer worked with my previous Windows 10 notebook via USB, and via ethernet worked with previous Windows versions back to XP. The computer would see the printer and list it's name, but would not install the driver. I tried a few other USB adapters with same problem and no luck. Turns out you need software in addition to hardware to make this conversion. I have since obtained a Startech port adapter for connecting my notebook to dual monitors, mouse, keyboard, ethernet, and the printer all through the notebooks 1 free USB-C port. Had to install drivers for the port adapter first, but now everything is working great. If you have a new printer, with installation software, this cable may work just fine. If your printer is old, you will need a port adapter with software.

I tried this adapter on two Windows 10 laptops. Windows did not find and install a driver automatically on either one, but I came to this site, downloaded the driver package, and was in business on both machines in a few minutes.

If you don't have a built-in Ethernet adapter, this gets the job done. Windows automatically identified and connected to the adapter. I was successfully on the Ethernet within a few seconds.

Works fine with Windows and Mac. This adapter can basically max out a gigabit Ethernet connection. I have it connected to a USB port on the back of my monitor so that a single cable gets me not only power and video, but also a better internet connection.