Iogear Bluetooth 2.0 Usb Adapter Driver

Try the black Iogear 4 port USB 2.0 Hub. You should get at least three connections and you can daisy chain them for your purposes. Good Luck.

I overloaded my previous Iogear hub by hooking up 2 Wi-Fi antennas, a DVD writer and a portable hard drive. I had been doing this and similar operations for about 2 months, then it got hot and failed. So, I went to B&H, asked for some candy and went to the computer dept to look for a replacement. I found this, much better than the basic black Iogear model and sexy too! And a god power supply. Design is everythinhg in my book. This unit performs flawlessly, but dont overload it. It supplies about 5volts & 500ma to each device on USB 2.0 If you notice it gets hot unplug your devices (hot swappable) and let it cool down. I only have a 3.0 & 2.0 USB port so this unit is vital to me. I suggest you plug in 2 or 3 heavy users and leave the 4th one free.

I was looking for USB to serial adapter which will work under the Windows 7 and this adapter does exactly that. Even better - Windows 7 already has built-in driver for this adapter!

Fast, Fast, Fast...even on USB 2.0

Not the fastest, but that's what happens with USB 2.0

No knock on the product, but I had hoped it would connect my USB -B ported laser printer to the USB-C port on my notebook. It's an older printer and the port is USB 2.0 standard. The description for this cable said USB 2.0 so I hoped Windows would recognize the printer. The printer manufacturer (very well known Brand) does not provide a driver for Windows 10, but their Website says Windows 10 comes with a driver for it. This printer worked with my previous Windows 10 notebook via USB, and via ethernet worked with previous Windows versions back to XP. The computer would see the printer and list it's name, but would not install the driver. I tried a few other USB adapters with same problem and no luck. Turns out you need software in addition to hardware to make this conversion. I have since obtained a Startech port adapter for connecting my notebook to dual monitors, mouse, keyboard, ethernet, and the printer all through the notebooks 1 free USB-C port. Had to install drivers for the port adapter first, but now everything is working great. If you have a new printer, with installation software, this cable may work just fine. If your printer is old, you will need a port adapter with software.

Got this to connect my XPS 13 from 2016/2017 to my 27" thunderbolt Apple monitor. It worked straight out of the box. However I have a Dell TB16 dock as well. Tried using that as well. So the dock's usb-c connector goes into the XPS, and the Startech adapter goes from the dock to the Thunderbolt monitor. That didn't work: I needed to update the BIOS, Thunderbolt firmware, thunderbolt driver, and installed I believe the latest thunderbolt application from the Intel website. Everything works now, even the audio and usb ports on the monitor. (facetime camera doesn't work, since it can't find a driver). All in all good buy, but I can't connect my 2019 macbook Pro to my thunderbolt monitor with the startech adapter. Monitor does not activate. Seems to only work with Windows machines.

Works good on 2.0 usb.

I use this with an Iogear 2 port usb automatic printer switch. I have 2 of these 6 inch cables that go out of the printer switch, one goes to a 7 port USB hub for a Mac Pro & the other to a 4 port usb hub for a Windows PC. I only needed short cables so they work perfect for me.

I recent;y purchased 1 IOGEAR 2-Port USB Switch. Liked it so much that I purchased 3 more. Planning to purchase another one.