Iogear Bluetooth 2.0 Usb Micro Adapter

Try the black Iogear 4 port USB 2.0 Hub. You should get at least three connections and you can daisy chain them for your purposes. Good Luck.

I overloaded my previous Iogear hub by hooking up 2 Wi-Fi antennas, a DVD writer and a portable hard drive. I had been doing this and similar operations for about 2 months, then it got hot and failed. So, I went to B&H, asked for some candy and went to the computer dept to look for a replacement. I found this, much better than the basic black Iogear model and sexy too! And a god power supply. Design is everythinhg in my book. This unit performs flawlessly, but dont overload it. It supplies about 5volts & 500ma to each device on USB 2.0 If you notice it gets hot unplug your devices (hot swappable) and let it cool down. I only have a 3.0 & 2.0 USB port so this unit is vital to me. I suggest you plug in 2 or 3 heavy users and leave the 4th one free.

Fast, Fast, Fast...even on USB 2.0

Not the fastest, but that's what happens with USB 2.0

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

Works good on 2.0 usb.

Works great, cute little android, perfect for phone micro usb to usb adapter.

I use this with an Iogear 2 port usb automatic printer switch. I have 2 of these 6 inch cables that go out of the printer switch, one goes to a 7 port USB hub for a Mac Pro & the other to a 4 port usb hub for a Windows PC. I only needed short cables so they work perfect for me.

I recent;y purchased 1 IOGEAR 2-Port USB Switch. Liked it so much that I purchased 3 more. Planning to purchase another one.

Be aware this is for older phones, I have a micro USB-C and wasn't paying attention, but you can buy a little adapter to use it if you choose do to so :)