Iogear Bluetooth 4.0 Usb Micro Adapter Driver

I bought Waves NX Head Tracker to use it with Logic Pro X in a Mac Pro Mid 2010 OS El Capitan and Bluetooth 2.1 I needed Bluetooth 4.0, so I bought this StarTech adapter. Plugged into my computer, but it was not recognized as BT 4.0. Then I downloaded Hardware_IO_Tools_for_Xcode_7.3.dmg, and installed Bluetooth Explorer in the Applications folder. Opened it, Tools menu and choose HCI Controller Selector, I clicked at the arrows and selected Broadcom Corp and clicked Activate. Done My computer recognized the StarTech adapter as Bluetooth 4, and I was able to use my excellent Waves NX Head Tracker.

Mini USB Bluetooth® 4.0 Adapter is a fantastic product! Better working range than other Bluetooth receivers/transmitters. Works great with Sony MDR-10R after checking ALL of the configuration for USBBT1EDR4. You MUST install ONLY the last version of the CSR Harmony software; if you have an older version installed, you MUST uninstall the older version first. The new version unfortunately does not include drivers for all of the older transmitters and you can't have more than one version installed at the same time. I highly recommend this product.

I was looking for USB to serial adapter which will work under the Windows 7 and this adapter does exactly that. Even better - Windows 7 already has built-in driver for this adapter!

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

No knock on the product, but I had hoped it would connect my USB -B ported laser printer to the USB-C port on my notebook. It's an older printer and the port is USB 2.0 standard. The description for this cable said USB 2.0 so I hoped Windows would recognize the printer. The printer manufacturer (very well known Brand) does not provide a driver for Windows 10, but their Website says Windows 10 comes with a driver for it. This printer worked with my previous Windows 10 notebook via USB, and via ethernet worked with previous Windows versions back to XP. The computer would see the printer and list it's name, but would not install the driver. I tried a few other USB adapters with same problem and no luck. Turns out you need software in addition to hardware to make this conversion. I have since obtained a Startech port adapter for connecting my notebook to dual monitors, mouse, keyboard, ethernet, and the printer all through the notebooks 1 free USB-C port. Had to install drivers for the port adapter first, but now everything is working great. If you have a new printer, with installation software, this cable may work just fine. If your printer is old, you will need a port adapter with software.

Got this to connect my XPS 13 from 2016/2017 to my 27" thunderbolt Apple monitor. It worked straight out of the box. However I have a Dell TB16 dock as well. Tried using that as well. So the dock's usb-c connector goes into the XPS, and the Startech adapter goes from the dock to the Thunderbolt monitor. That didn't work: I needed to update the BIOS, Thunderbolt firmware, thunderbolt driver, and installed I believe the latest thunderbolt application from the Intel website. Everything works now, even the audio and usb ports on the monitor. (facetime camera doesn't work, since it can't find a driver). All in all good buy, but I can't connect my 2019 macbook Pro to my thunderbolt monitor with the startech adapter. Monitor does not activate. Seems to only work with Windows machines.

Works great, cute little android, perfect for phone micro usb to usb adapter.

I use this with an Iogear 2 port usb automatic printer switch. I have 2 of these 6 inch cables that go out of the printer switch, one goes to a 7 port USB hub for a Mac Pro & the other to a 4 port usb hub for a Windows PC. I only needed short cables so they work perfect for me.

I recent;y purchased 1 IOGEAR 2-Port USB Switch. Liked it so much that I purchased 3 more. Planning to purchase another one.

Be aware this is for older phones, I have a micro USB-C and wasn't paying attention, but you can buy a little adapter to use it if you choose do to so :)