Iphone Headphone Jack To 3.5 Mm

I bought this subwoofer to extend the low frequency range of a table-top sound box used with my Sony TV KDL-46HX850. I used the TV audio output (headphone 3.5 mm jack) to get the audio signal to the subwoofer using a cable with 3.5 mm plug on one end and two RCA (M) on the other end; then a Y adapter cable 2 RCA (F) to a single RCA (M) to the subwoofer. The setup works fine. Just required some adjusting of the crossover and S/W volume settings. Using the audio out jack set to "headphone" in TV settings, I discovered that I can control the S/W volume with the TV remote for fine tuning. The capture of lower range sound is great, and I love the small size of this sub in the limited space I have in the bedroom.

I was looking to send audio from the 3.5mm headphone jack on my Mac to the 3.5mm mic jack on my cell phone, because I had a professionally recorded voicemail message I wanted to use but my service provider only allowed live recorded messages. (I wasnt just going to hold my phone up to the speaker on my Mac, because it would ruin the quality.) I had a male-to-male 3.5mm cable I tried to use, with no luck. I was confused as to why it didnt work. I couldnt figure out how to do it and went to a few nearby stores looking for advice, but every sales person just looked at me with a confused look and had no idea how to help. Luckily I noticed B&H was around the corner from a job interview I had. Ive always wanted to go there, just never got around to it until that day, and boy am I glad I did. I spoke to a gentleman in the Pro Audio Dept and after about 10-15 minutes of carefully listening to my needs, and taking the time to understand what I wanted/needed he informed me I needed an attenuating cable because the voltage coming out of the headphone jack would have destroyed the mic jack on my phone. I was finally on my way, but then just as I was about the thank him for his help he exclaimed WAIT!! and informed me that the two jacks were configured differently, (the headphone jack was TRS, and the mic was TRRS) and I would have no luck with just the attenuating cable so he pulled up this item on his screen explained it would convert the connector to what I needed and sent the whole order to pick up. I purchased and picked up the two cables and excitedly went home to test out the items. They worked!!! tl;dr This item was exactly what I needed, and it did its job perfectly.

needed it for an iphone w/o the headphone jack

I'm using this adapter to get an RCA stereo auxiliary input to plug into my car stereo, which has a 3.5 mm stereo jack. This works exactly as it should. The RCA female plugs fit nice and tight, so I don't have to worry about the connection loosening over time. Great value for the price.

I use it to connect my Sennheiser G4 500 series and it has not let me down so far. I like the locking 3.5mm jack, make everything just a little more secure on a hectic set. One less thing to think about.

so just fyi if you adapt a mic with a 3.5mm TRS plug to XLR, heres a really useful tip adapting what looks like a 3.5mm stereo jack to a 1/4 inch jack to the XLR adapter you will wanna use a 3.5 mm jack to a 1/4 inch MONO jack. otherwise you will not get a signal. i know it seens like a 3.5 stereo jack to a 1/4 inch jack seems like what ya wanna do. And a lot of people make this assumtion, i did. Just figured id share this info for anyone who is trying to troubleshoot why they are getting no XLR input.

So yes. First off this thing cleans up your audio from external mics very well. I've tried this on my motorcycle with the gain set to -10db and it turned out very clear (I am still editing that video). It fits nice and tight onto the side of your Action 3/4. Something to note....you WILL need to remove your usb-c access door to use this. Lucky for you, it removes easily by design and yessss it fits Into your camera while your camera is still in a cage. Another thing is you CAN use the usb-c port to charge your camera while still using the 3.5mm jack to plug a mic into while recording. - The 3.5mm jack is a TRS port so your mic has to have 2 lines on the 3.5mm end (not 3) in order to work with this adapter. - You cannot use the usb-c port of this mic adapter with a usb-c microphone as that mic will not work. If you have a usb-c microphone, plug it directly into the camera to use it. - the usb-c port of this adapter can be used to transfer files from the camera to your phone/laptop/tablet or PC or charge the camera ONLY.

Overall, they Have a Nice Clean Sound and They Come with the 3.5mm Adaptor so if you done need the 1/4 jack you can still use and enjoy these headphones.

I use this to convert my Rode NTG 2 to my Canon t4i's 3.5mm mic jack, and I am very pleased.

Sound quality is great. Incoming and outgoing. Also love that it has a 3.5mm jack in addition to the USB