Jeep Wrangler Rear View Mirror Power Button

These radios are amazing. Installed in my Jeep above my rear view mirror and I am stoked about it. It’s small enough to not be in the way but is great for communicating with fellow Jeep’s. I used the ghost antenna so that it didn’t get wiped out by limbs on the trail. I’m thinking of purchasing the 6db antenna to help increase my range. I feel you can’t go wrong with this radio! Will be purchasing another for my sons Jeep.

Excellent camera. Great vehicle and license plate recognition, except if a Jeep Wrangler without roof is passing by. Doesn't pick it up for some reason. Make sure you pair it with another camera, so you can get full pictures 24/7 of what the ANPR camera snaps.

Bought this product about 30 days ago for camping and boon-docking with my Jeep Wrangler. Absolutely love it!

Carry all my photo gear in my Jeep Wrangler in many rough and tight spots in the hills and mountains. Closes water and dust tight. Gear is held in place by foam all around item. Like the two step closing system.

I say little, but it's a real powerhouse! Its compact size allows it to mount above the mirror in my jeep and its 15 watts of power allows me to reach out to anyone in my group offroad. The install could not have been easier. I highly recommend.

In the mid-1980s I bought a Nikon 7.5mm f5.6 circular fisheye. Being an older design (1966) its rear elements protruded into the mirror box. Fortunately my F3 had a hard physical mirror lockup. The external viewfinder for this lens attached to the camera on the original Nikon F/F2’s proprietary flash shoe. I was able to buy an AS-3 flash adapter for the F3. With the F3s mirror locked up I also had to use an hand-held light meter. With amazing depth of foield focusing was never an issue. The old zoom lens had six filters on a wheel. One was a skylight and the other five were strongly colored for B&W film. While I liked the circular results, using the lens was a hassle. I often had my shoes or forehead in the picture. On a sunny day, my images suffered from solar flares. My new Nikon 8-15mm AF-S fisheye has none of those old problems. It fits on my DSLRs without any problem. It doesn’t need an external finder or separate light meter. At the 8mm setting (and lens hood off) I get a circular image very much like the vintage fisheye. The new lens is faster and focusable. Like my 14mm f2.8 Nikkor, this zoom uses gel filters inserted in the rear of the lens. I really don’t like this arrangement. This fisheye is similar in weight and size to the 14mm lens. I am also not fond of the electronic aperture control first seen on G lenses. Without an aperture ring one cannot use this zoom on older cameras. At the longer end of the zoom range (12-15mm) the image fills the (FX) frame and lens hood stays out of the way. This image is similar to my inexpensive Bower (Samyang?) 8mm fisheye with its fixed lens hood (and DX coverage). So far I haven’t used my new lens much but I think I will like it.

Easy to set up a view, really makes a difference in just the push of a button

I shoot a lot of landscapes. In order to minimize camera vibrations while on a tripod, I use my camera (Nikon D7100) in 'mirror up' mode. I sometimes use the ML-L3 wireless remote shutter, but I'm paranoid about the battery running out while I'm miles away from 'civilization'. Thus, I picked up this little baby, intending to use it as a backup. However, I now use it as my primary shutter release. It's simple to use (just plug it into the little socket on the camera), and press the button. Actually, you need to press the button twice - once to raise the mirror, and once after the vibrations have died. There's a mechanical locking position for use with long exposures (e.g. bulb).

I have a 10d with a 35-350 L lens. With the battery pack, the whole set-up weighs 6 pounds, 8.5 ounces, or 2.96 kilos. I have a decent tripod, but even though it can easily handle the weight of the camera, when my tripod is extended fully, or the top bar of my tripod is extended to the side, I get a lot of shake simply from touching the shutter release button. Even with the two seconds of delay that the mirror lock-up/ timer combination gives me, the camera is still shaking when the picture is taken. But not now that I have the RS-80N3! This remote is just what I have been needing for increasing camera steadiness to the best my camera/tripod combination allows. The RS-80N3 is a simple, cabled remote control, nothing more. One button, which acts just like the cameras shutter release, with two stops - one for auto focus to do its beautiful thing, and one for shutter release or mirror lock-up or whatever else you have programmed your camera for - and it does its job well. The button can also be pushed forward and locked when depressed fully, to take as many continuous shots as your camera will allow, or to hold the shutter open when you are shooting with the bulb feature. Small, light-weight, and easy to hold. Im fully pleased with this remote control, and have no negative points to say about it. It is what it is, and it does well what it does.

This works well as a head strap but it also works if you want to use it to wrap around something that may be easily scratched. This could mean the side view mirror of a car or maybe just to wrap around your pet. Over all, this product is one to have handy.