Laminator Machine Fix Youtube

this product is what it is. the genuine fix when your machine fails... but gosh theyre expensive, and I wish there were a square trade option available for them, because Im replacing them on the regular.

You can make this fix yourself with a #6 torx, a soldering iron, and a little patience.  Some very good YouTube videos on how-to. A $10 solution to a $550 problem.

Fix is fix

Purchased this to do two things, take my 4k 60 fps output from vMix from my production machine, and stream, via OBS and AV1 to my YouTube channel. And, to record at 75 MB/s. Took some old parts, an unused 10900K and a really old Phanteks case, and cobbled it together. The vMix output is fed either by 10 Gbe NDI full, or in to the HDMI, PCIe Magewell capture card. I see no difference in quality either way, so NDI wins, by virtue of simplicity (otherwise, the HDMI optical needs to be plugged in to the Quadro card on my production machine, which requires an HDMI to DisplayPort adapter). Had two goals, 1st to offload some of what vMix was doing when it was also streaming, recording and switching all the inputs. This did reduce about 15-20% GPU load, and a few percentage points of CPU usage. The 2nd goal was to play around with AV1 encoding on live streams, even though it is only YouTube that offers an ingestion server for now. This has been a spectacular success. Have tons of bandwidth on the upload, but I feel the AV1 ingest is better quality than HEVC, and it never hurts to get the same performance at 25 Mbps upload with AV!, that I was getting with 50 Mbps using H.264. Card looks good, runs cool, and Intel and Acer each are putting out timely updates. On the beta code train with the Intel drivers, and have not had a single glitch. Acer provides a nice little USB thumbdrive for their BiFrost applet, which updates itself frequently. About the only super minor issue I have, is the card's RGB looks more purple than the static blue I set, on the lit up name badge. Since this box sits 50 feet away in an unused room, I do not care, but some might!

Fix anything!

Just the right fix.

This is all you need to fix your tele to your cam.

The small splint is very practical. Fix the camera strap to the rrs main board, and fix the camera with the splint. If you often use a tripod, this is a good accessory.

There's not much to say -- mix and fix. It's that simple.

fix everything that I need to fly with phantom4