Liquid Detected In Usb C Connector

Very well built quality. Not vignetting detected. Pro tip we also use it as a connector for Canon WC-DC58B 0.75x wide angle converter, cause 58mm hood front thread deep enough to install WC-DC. And it is cheap : )

Great mic for the price. I've used it once and it was excellent. Sounds at least as good as an ME2 or the Sony mic that came with my UWP-D11 unit. And as for a discovery I made... this mic also works with Sennheiser mics! Although the connector is the same, Sony and Senny mics are usually incompatible because they are wired differently. After I opened it up I found out why... they put a tiny resistor between the tip and ring pins, at least for the Sony version; I don't know about the Senny version. And here's the best part... the Sony version is about $40 less than the Sennheiser one. It's a no-brainer, get the Sony one and it will work for any G2/G3's you might have hanging around. Oh, and by the way, take some liquid rubber/liquid tape and reinforce where the cable meets the collar at the connector. I do on all of my lavs and they last MUCH longer.

best liquid !

I purchased this for my USB 3.0 hub to extend the distance of it. I plugged the hub into the end and my USB devices were detected fine. From my observation speeds are the same with or without the extension cable. The cable also has a decent width to it and feels sturdy.

I bought 2, and both are excellent. The only draw back is the lack of USB-C connector.

Love the stylus has a usb-c connector. One fewer cable to tote around.

I love that it has both xlr and usb. My only complaint is that it doesn't use a USB C type connector. The micro USB is flimsy and the cable it comes with is cheap. I had to purchase a higher quality cable.

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

Very well done. The USB connector retracts easily. Looks like it's going to last long.

USB 3.0 is very fast and the connector is better designed than USB 2.0. The mini USB will become lose after sometime.