Logitech 3.5 Mm Analog Stereo Headset H151

If you need a 1' stereo 3.5mm to 3.5mm cable, this is it.

I searched and tried other stereo Y cables, but thankful that I finally found this Kopul 3.5mm Stereo Y Cable as it exemplifies the characteristics of a solid build using good materials to produce a reliable and durable Y cable.

The Sonos line-in adapter did it's job as the final link to connect an analog turntable to a Sonos System. The line-in adapter is Sonos specific. Not just any USB-C to 3.5mm adapter will do the job. You will also need a phono pre-amp, and an RCA to 3.5mm y-cable. The line in adapter worked perfectly.

I have no complaints about this stereo mini 3.5mm cable. It sounds great and seems to be built well.

I had to hook a headset (mic and headphones) to a Griffin iMic. The headset has a 4-pin/TRRS 3.5mm plug; the iMic has two jacks, a mic input and headphone outputs; both are 3.5mm 3-pin/TRS. This is the cord that converts it. It works. It's sturdy. I don't think about it. It's surprisingly hard to find these things, so I'm glad B&H stocks them.

This is a great little addition to an iPhone, allowing the use of a real headset (aka one with a standard 3.5 mm plug) and charging at the same time.

I plug this AC-5002 headset into the 3.5mm jack on my HP Probook for Zoom conferences and everything works perfect. Priced less than twenty bucks you will have a tough time finding anything that works better.

this not only helps you expand the signal but its also a clip on and it has a 3.5mm input so you can connect a wired headset to it and make it an extra headset for your kit.

This does more than merely adapting from 3.5mm to XLR. For most PA uses, where one needs to run output from an iPad or other portable device into a mixer, it should be mono and balanced. A splitter adapter cable that goes from XLR to stereo 3.5mm male is ONLY suitable for converting from XLR to dual channel mono out via 3.5mm. The process doesn't work in reverse unless you use a transformer like this that specifically sums the two stereo channels to create a proper mono mix (not just one stereo channel, which may be missing important parts of the mix that are in the other channel). This works perfectly, and I use it several times per year.

I'm using this adapter to get an RCA stereo auxiliary input to plug into my car stereo, which has a 3.5 mm stereo jack. This works exactly as it should. The RCA female plugs fit nice and tight, so I don't have to worry about the connection loosening over time. Great value for the price.