Logitech Wifi Ip Camera

I have a wifi only laptop that I wanted to use to test a newly purchased IP camera on. The adapter allowed me to connect a ethernet cable to my IP camera for testing. After giving the adapter a IP address in the same range as the camera my system connect with the camera perfectly. I would highly recommend this adapter for anyone needing to add ethernet wired access to there wifi laptop.

Both ethernet and wifi have been great. I finally was able to setup port forwarding and static ip rules with no issues. Also love the traffic analyzer in the GUI.

Does what I needed powering an IP camera.

Works great with logitech camera.

This was easy to use and connect to a IP camera set up. Receives sound good.

Good product, easy to install and looks nice with Dahua Bullet IP Camera.

We are a developer of command and control software and often buy various brands of IP cameras to test with our software suite. This camera was an addition late last year and we've actually deployed it on our property (mostly for testing). We cannot say enough about Axis products... this camera works as advertised and was easily integrated into our software. It is ONVIF compliant and provides crystal clear video. We are located in Florida and rarely use the defogging feature, but we would love to have self cleaning optics (a feature starting to appear on high end IP cameras) since the camera is located nearly 30 feet in the air making it difficult to clean... but that is the only thing we had in the wish it had it column. Overall a highly versatile and functional PTZ IP camera... we highly recommend this one!

This camera was purchased as a replacement of a defective IP camera. It worked immediately and provided an outstanding picture.

This kit worked perfectly with POE NVR and 2MP IP camera over 30 feet of existing coax. There needs to be 3 x 2 x 1 inch of space for this device on transmit side plus enough extra space to add rigid BNC connector to coax, but possible in 4 x 4 double gang box. The receiver mounts on 35mm DIN rail but the spring clamp wasn't strong enough to prevent slipping.

We have purchased two of these so far to use primarily as NVRs for a large number of IP cameras on a school campus. Licensing costs aside, Synology Surveillance Station does a really nice job making it easy to set up and scale with the number of cameras you have. We linked two together, making one the primary and the other a secondary target for recordings. Surveillance Station records direct-to-disk, and does a decent job of adjusting camera settings directly using ONVIF. We have about 50+ cameras running at resolutions from 1280x720 up to 2560x1600, some PTZ, some ceiling-mount fisheyes, mostly wide angle fixed, and everything works pretty well. We were even able to use the manual camera configuration to use some uncommon double-lens cameras. With about 26 cameras assigned to each RS422+, we see about 20-25% CPU on each on average during a typical day. We can comfortably handle 32 per unit, and supposedly up to 40 if needed. With x4 6TB drives in each set in SHR-1 (equivalent to RAID5) we have about a month or so of footage retention. The licensing is a little pricey at $50 per camera (unless you buy in bulk from some european IP camera shops...), but it is perpetual and I think worth the expense. Using two of these units, 8 cheap drives from eBay (luckily these do not suffer from the Synology whitelist) and a bunch of camera licenses, for around under $5000 I was able to build and set up a really easy to use and reliable NVR system with plenty of future expandability. 2-3 users are regularly connected on their desktops without issue.