M3D Print Not Sticking To Bed

This is great for a glossy print that I had to send out to a friend. To keep it from sticking to the glossy print, I used tissue paper to wrap the print and then it slid easily into the protector

The da Vinci Jr. 1.0 is a great bang for your buck with the decent build size of 6 x 6 x 6 inches and SD card compatibility. I printed out numerous projects so far and the print quality on this machine is fantastic. The only issues with printing is that it sometimes has trouble printing small details. However, this could be improved by changing the print settings in the XYZware, like making the extruder move at a slower rate, which decreases streaking. So, one of the most important features about this printer is its usability. Let me tell you right now, this machine will take you a while to set up properly. There isn't the three-knob calibration print bed that other 3D printers have,for this printer wants to be more approachable by maintaining a fixed, leveled print bed. The only thing you have to do is fix the Z Offset, which is the distance from the extruder nozzle to the print bed. This is the only calibration you have to do but it can be tricky getting it right the first few times. Unfortunately, not all of these printers were made the same, one printer could be printing excellent at .90mm offset, but mine functions the best around 1.65mm offset. This printer does 100 to 400 microns, and the infill and speed are all adjustable in the XYZware. I've printed out some quick decorations for my desk, but I've also spent a few hours printing out this model of the Statue of Liberty at excellent quality (100 microns) and slow speed at a 30% infill. The quality of the model was amazing. Overall, the 3D printer was hard, even frustrating at times to set up properly, but once it gets going it produces some of the best prints I've ever seen.

My first 3D printer and I love it. The instructions are clear and it is easy to assemble out of the box. There are a ton of youtube videos on this printer so this has helped me a lot. What I found most valuable is to make sure you FIRST mechanically flatten the bed and then do the auto-leveling. I do an auto-leveling before each print because every time I remove a previous print I fear it moves the adjustment. Remember we are printing ~0.12-0.2mm layer heights so I think it is important to auto-level each time. It only takes a minute or two. Also do it with the bed and nozzle at the temperature you are going to print at.

Very easy setup. Took 10-15 minutes. The magnetic bed it has is awesome. Just flick the print once its cool and comes right off. Print quality is nice and faster than what i had. Mine came with the camera , which is less trips to the workshop. Creality cloud is nice can slice and upload remotely and even start a print from my phone. Lastly the auto off function is nice for those prints that finish overnight or while i am away. Love it worth every cent

I use this on my tTechnics sl 1200 m3d. The m3d has a hingeless dustcover design, meaning that the stock cover just kind of sits on top of the table, but could be knocked out of place, hitting the tonearm or causing other damage. My cat has actually done that. With the Decksaver, it fits nice and tight, over the edge of the deck, and will not slide around. It is airtight, meaning that dust or pet hairs cannot sneak inside. It's lighter than the stock cover as well. One thing to consider: if you plan on playing records with the Decksaver on, you will need a flatter headshell (the little grabber arm on the Technichs headshell sticks up too high for the needle to make it all the way to the inside of the record, because of that divit in between the two rectangles on the cover). I got a Sumiko HS 10 and it plays fine with the dustcover.

In my bed room

It works well, but watch out for pieces sticking together!

Works well. no sticking threads

I use is when i read in bed to charge my tablet.

Great storage drawer for under my bed!