Mac Ethernet Cable Not Detected

The Coupler works great. I had a short ethernet line coming out of the wall and needed to entend the connection to my Mac. I connected the coupler to the ethernet cable, connected my other cable to the coupler and voila, signal to my Mac.

I chose ethernet communication between my Mac and new printer. This snag less ethernet cable with such great performance has proven itself to be a wise investment.

Not much to say about an ethernet cable, except that it works.

Short Ethernet cable that works.

Ethernet cable wet dream.

A Ethernet cable that works! And it was low cost.

Excelent recorder and multitrack interface. It's really convenient moving to usbc and is instantly detected on Mac and IOS

We use these for our timeclocks that are not wifi but have an ethernet cable connection. Works well.

This works very good for the iPhone 13 Pro, but the instructions aren't good to explain how to use it well. If you plug it in with a lighting-usb cable and then turn on the device, it will not be detected to use as an audio device but will be detected in the Rode Central App. If it turn it on and then plug it in, it will be detected and usable with Filmic Pro and the Camera stock app. Make sure you toggle AAC if using Dolby Vision. If you use the USB cable, your audio will be line level but will ignore all the dB boosting done on the device. However the audio will be in stereo so you can use both inputs to mic up a talent or for 2 and use which ever channel is better. Post audio processing will still have really clean audio when normalizing and doing simple cleanup. If you use the provided cable and connect it to a lighting-3.5mm mic input then dB boosting will work. However the audio will only be the sum of the audio sources in mono. A good situation using this is you can use it with a Shotgun mic such as the MKE-600 that uses a AA battery to self power for phantom power and plug it in one TX using the 3.5mm input and the use the other TX as a lav mic.

I purchased this for my USB 3.0 hub to extend the distance of it. I plugged the hub into the end and my USB devices were detected fine. From my observation speeds are the same with or without the extension cable. The cable also has a decent width to it and feels sturdy.