Make Projector Screen Smaller

We use this projector screen in our church activities.

The size was too large for my use I needed smaller size. Make sure of your lens size before you order.

I installed them next to my projector screen and they sound great.

I use this to convert a 20amp plug on 12k Projector to a 110v outlet. Make sure you still have a dedicated 20amp for your equipment or you will trip the circuit.

Anyone looking to extend there monitor onto a TV screen or projector this is the way to go.

Using this to decode an NDI source to a projector in Church services with live stream. We previously were sending the Presentation Laptops screen to the OBS computer via NDI, and used a separate proprietary wireless video feed to the main projector. Got this so we can use the same NDI source for both and eliminate the wireless projector feed. It is working well. One thing to be aware of: the projector will display will go blank in a couple of seconds if there is no video and audio activity when using NDI Screen Capture as the source. This can be an issue during power points with static screens. You can set the decoder to keep the last thing displayed on the screen or allow it to go blank. I prefer it to go blank so I know something is wrong right away. You can also resolve by making sure the NDI Screen Capture is using an active audio source (like the microphone). This decoder has been reliable and is reasonably priced. Perhaps other decoders won't have the inactivity issue but they are also more expensive. This has not been a show stopper for us.

This thing worked great. This is just what I needed to get my screen up and another screen to my projector up at the same time in my sanctuary. This was great.

If you're going with a phone mount, this will work for you. Make sure you get the right size, depending on the width of your phone. They make one for smaller phones and a different one for wider phones. I have the wide one. You can easily turn the phone from vertical to horizontal. The contraption is totally solid, so you'll not be disappointed there; there is nothing to break, and it's compact, too. Rick

Works great! Make sure to review the size, I have a smaller tripod and thus have some extra room unless I leave the tripod extended slightly

Screen protector fits my X-T5 LCD perfectly. Make sure the panel is absolutely dust free, or you may get a small bubble. I apply it directly using two hands rather than the hinge technique they describe. I've never had luck with that. Two hands from from directly above is my method of application. Screen is responsive to touch, nice and clear and a great addition to my cam.