Micro Usb Power Sharing Cable

I use this cable primarily to feed power via USB-C PD (power delivery) to my Micro and Mini V-Mount batteries that feature USB-S PD to power a Sound Devices Mix-Pre 6 Recorder. The cable wire has a nice and grippy material and the USB-C connectors stay well secured and will not come off easily to ensure a secure connection, especially when powering a recorder, in which I cannot afford to get power loss or interruptions, especially when recording critical audio such as interviews or seminars. Very happy with this cable and the size is just about right for my needs. [I have received this item in exchange for my honest review]

not counting the USB power source and micro-USB cable, this is smaller and lighter than the OEM Canon charger *and* charges two batteries at once!

Having a battery this size that can be recharged with just a micro-USB cable and a power source is a boon if you travel. I use these cells in pocket flashlights that perform very well on increased voltage from a single AA-size cell. So far, the capacity claim seems to be well-founded, as I haven't had to recharge the first one yet.

Connecting an Iogear 2 port KVM Switch with a Plugable USB Sharing Switch.  The two sit right next to each other, so this 6 inch cable is just right.  Be warned that a 6 cable is VERY short!

Needed this for charging from a micro-USB cable. Works great for that.

I have another review that I wrote about this mic, but B&H's website doesn't appear to let me update that review. I've now been using this mic almost daily for over a year. The audio is crisp and clear, background noise is kept to a minimum, and people on the other end of the meeting/phone call give compliments on the detail that this mic captures. I used to use a condenser mic, but that also had the annoying feature of picking up a lot of 60Hz hum. This mic doesn't do that and I didn't have to make any adjustments to the room either. For the person who mentioned they couldn't fit it in a shockmount, it has one internally. That is why the mic is the size that it is. For those complaining about the USB port, mine hasn't had any issues. I accidentally bent the micro usb connector on the cheap cable they shipped with it and the mic survived just fine. The cable, on the other hand, was useless after that. I solved this problem by finding a 90 degree USB adapter so that the connector isn't pointing straight out the back of the mic. It now sits mostly flush and swiveling the mic is more likely to cause the adapter to disconnect at the other end. If your laptop, like mine, is usb-c only, don't try to buy long usb-c to usb-c cables. They are crazy expensive. Instead, try to buy a usb-c to mini or micro usb-b cable. They are much cheaper. My setup is usb-c to micro usb (10 feet), then an adapter from micro-usb to usb-c (1 inch), and then finally a short usb-c to 90 degree micro-usb adapter (6 inches).

Buy a longer cord like the USB 3.0 A/ML to MICRO B/ML CABLE - 3'

The cable is well made, not flimsy. The USB & micro USB plugs plugged in smoothly with no struggle. Recommended.

By far the best and most reliable USB to Micro-B cable I've found. Frustration takes a back seat to quality.

Plug-and-play, no software setup required. Needs a micro usb power supply. Can use both conversions simultaneously. I'd love if BMD made one for 4K!