Microsoft Lan Surface Ethernet Adapter Driver

This adapter works well with Linux, but will require the user to compile the open source driver and install it. Careful instructions are on the web. I use it on a workstation normally attached to ethernet, but occasionally in need of wireless access. Quick speed test on a strong signal was about 250Mbps (650Mbps on ethernet).

I use this adapter to connect a Microsoft Surface Pro to a second monitor. It fits nice and snug, never randomly falls out and generally works perfectly.

I bot this for my Microsoft Surface Pro 4 - it worked well without a glitch. I liked it for the simplicity of carrying a single adapter from MiniDP to HDMI and VGA.

Simple little adapter worked perfectly on my MS Surface which does not have an Ethernet connector. You can't ask for more. PS It arrived much sooner than I expected.

Microsoft surface pen is a great choice

I have used several types of laptop computers, but Microsoft Surface Pro 7 is more than I expected :)

Honestly this is my first build. Only issue I ran into is the intel LAN driver was nonexistent. I downloaded the driver and uploaded it via usb drive and badabing I have internet connection. Really enjoying the aesthetics with my white build. No regrets with my decision with buying the B550A

This is the simple but versatile device that I recommend as a router for all my friends and family, and will also use as an access point for them or small businesses where integrated solutions are too complex for a handful of users. Qualcomm Atheros chipset, with 350 Mbps WAN To LAN capability routing. Firmware has stabilized and now I am able to fully recommend (January 2021), albeit feature set is still lacking compared to AirRouter predecessor, but offers core abilities for baseline users. For the airCube, plug the ethernet from the modem into the WAN (eth0), then you may connect your computer via wireless or ethernet to the LAN ports (PoE In, 2, or 3), typing in https://192.168.1.1 in your web browser, with ubnt as username, and password printed on the label beneath. Most people are now aware and desiring to minimize wireless radiation, so I recommend them to turn off the 5 Ghz wireless, and configure the 2.4 Ghz for 20 MHz Channel Width, select channel 1, 6, or 11, while starting with 5 dBm output power (transmit power is logarithmic, so 5 dBm is 3mW, wile 20 dBm is 100 mW), and choose the SSID Name and Password. Look for a signal strength of -80 dBm or better (-55 to -60 dBm ideal) is recommended for stable links, and increase the output power until that range is achieved for desired places. Obviously, line of sight and height is appreciated for more effective communication. Increasing the Tx power on any wireless device will create a noise for other wireless devices. The rest you could choose to remain as default or configure more.

I use this with a 20gbps ethernet SFP+ backbone uplink from the UniFi SFP+ Aggregation Switch. My LAN has never been faster!

Not much to say, it's a USB to Ethernet adapter. Works exactly like you would want it to.